COPPER NICKEL 10 ALLOY SHEET (PLATE STRIP)
Copper Nickel 10 Alloy Sheet( Plate Strip) is used in applications where resistance to corrosion and stress cracking is important. Copper Nickel 10% Alloy sheet is known for its moderate strength, weldability and formability.
Copper Nickel 10 Alloy Sheet( Plate Strip) is used in applications where resistance to corrosion and stress cracking is important. Copper Nickel 10% Alloy sheet is known for its moderate strength, weldability and formability.
Applications of Copper Nickel 10 Alloy Sheet (Plate Strip):
Copper Nickel 10 Alloy Sheet is typically used for brake lines, power steering tube, screw lamp bases, weld torch tips, pump impellers for oil refining, pressure vessels, distiller tubes, ferrules, heat exchanger tubes, evaporator tubes, condenser plates, condensers, evaporators, valve bodies, boat hulls, hot water tanks, water hoses, tube sheet for salt water service, ship hulls, propeller sleeves, salt water pipe fittings, salt water piling wrap, salt water baffles, salt water piping systems, and flanges
Nominal Composition of Nickel Copper 10 Alloy Sheet (Plate Strip):
Alloy | Ni% | Cu% |
10 Alloy | 6 | Bal. |
Typical Tensile Strength of Nickel Copper 10 Alloy Sheet (Plate Strip) :
Alloy | 10 Alloy |
Tensile strength Min-Max (N/mm²) | 230 - 680 |
Elongation % (Approx.: Annealed) | 20 |
Physical Data of Nickel Copper 10 Alloy Sheet (Plate Strip) :
Density | 8.9 g/cm3 |
Specific Heat | 0.38(J/kg 20℃) |
Electrical Resistivity | 0.015×10-6ohm.m |
Melting Point | 1100℃ |
Maximum Operating Temperature | 300℃ |
Coefficient of linear expansion (coeff 10-6/°C) | 16( from 20 to 1000℃) |
Properties of Nickel Copper 10 Alloy Sheet (Plate Strip) :
Alloy | Specific Resistance (µ Ω-cm) | Density (g/cm³) | Linear Expansion Coeff. (T=20-100 °C) | Maximum Operating Temperature of Element (°C) |
10 Alloy | 10 | 8.90 | 16.2 | 300 |
Product Description: The product produced by us is of good quality and is priced reasonably.
Competitive price: The labour cost and cost on procuring the raw materials is low and hence the manufacturing cost is reasonable. We provide high facility in short producing cycle and have strong adaptive capacity in producing variation of products.
High quality assured: The work done by us has a good command of advanced technological process in the respect of smelting, rolling, drawing and heat treatment up to finished products. The chemical analysis department, the physical testing department and the quality control department all operate an all-round monitoring of our products from raw materials to final products.
Packing Process & Transportation:
Packaging: Seal up, with plastic inside and wooden case or carton outside; or according to the customer's requirements.
Transportation: By air: Beijing International Airport OR By sea: Trianjin Seaport
We provide our customers with excellent services. If you want more detailed information of this product or related problems, please contact with us, we will reply as soon as possible (general in 24 hours).
