5 Alloy Cu-Ni WireSheet Plate Strip
5 Alloy Cu-NiSheet Plate Strip is one of the corrosion-resistant copper alloys. Cu-Ni 5 alloy Wire Mesh resistant to moisture, non-oxidising acids, alkalis and salt solutions, organic acids and to gases such as oxygen, chlorine, hydrogen chloride, hydrogen fluoride, sulphur dioxide and carbon dioxide.
There is no risk of stress corrosion cracking with Cu-Ni 5 alloy wire, the tendency to selective corrosion is extremely small and pitting corrosion is seldom observed. The resistance of Cu-Ni 5 alloyWire Mesh– as with the Cu-Al alloys – relates to a stable protective coating on the surface.
Sheet Thickness: 0.05mm and above
Nominal Composition
Alloy | Ni% | Cu% |
5 Alloy | 2 | Bal. |
Typical Properties
Alloy | Density (g/cm³) | Specific Resistance (µ Ω-cm) | Linear Expansion Coeff. (T=20-100 °C) | Maximum Operating Temperature of Element(°C) |
5 Alloy | 8.90 | 5 | 16.4 | 300 |
Tensile Strength
Alloy | 5 Alloy |
Tensile strength Min-Max (N/mm²) | 220 - 440 |
Elongation % (Approx.: Annealed) | 20 |
Applications:
1. Good processing characteristics to semi-fabrications and to finished parts in all forms, dimensions and strengths by hot and cold working and by casting;
2. In many cases, the attractive light colour of alloys containing more than 5% Ni;
3. Good mechanical properties both a low and elevated temperatures;
4. Special physical properties, high electric resistivity and its low temperature coefficient;
5. Good corrosion resistance and wear resistance;
6. High security against stress corrosion cracking and corrosion fatigue.
Product Description: The product produced by us is of good quality and is priced reasonably.
Competitive price: The labour cost and cost on procuring the raw materials is low and hence the manufacturing cost is reasonable. We provide high facility in short producing cycle and have strong adaptive capacity in producing variation of products.
High quality assured: The work done by us has a good command of advanced technological process in the respect of smelting, rolling, drawing and heat treatment up to finished products. The chemical analysis department, the physical testing department and the quality control department all operate an all-round monitoring of our products from raw materials to final products.
Packing Process & Transportation:
Packaging: Seal up, with plastic inside and wooden case or carton outside; or according to the customer's requirements.
Transportation: By air: Beijing International Airport OR By sea: Trianjin Seaport
We provide our customers with excellent services. If you want more detailed information of this product or related problems, please contact with us, we will reply as soon as possible (general in 24 hours).
