INCOLOY 945 WIRE
Incoloy alloy 945 Wire is a high-strength, corrosion-resistant alloy designed for demanding applications in the oil and gas industry. The properties of this age hard enable nickel-iron-chromium alloy are enhanced by its contents of molybdenum, copper, niobium, titanium, and aluminum. Incoloy alloy 945 Wire's nickel content results in resistance to chloride induced stress corrosion cracking. Nickel, in conjunction with the molybdenum and copper, also gives Incoloy 945 Wire outstanding resistance to general corrosion in reducing media. Molybdenum also imparts resistance to localized attack (pitting and crevice corrosion). The alloy's content of chromium provides resistance in oxidizing environments. Niobium, titanium and aluminum participate in the age hardening reaction that occurs during heat treatment. Their interaction forms gamma prime and gamma double prime precipitates, which strengthen the alloy.
To ensure the quality of our product, we can produce the product with raw materials from the international suppliers. Every batch of product can be tracked to the original raw material supplier. We co-operate with international suppliers like Allvac(ATI), Bohler, Carpenter, Dunkirk, Gloria, OttoKumpu, SMC, ThyssenKrupp VDM, Valbruna, etc.
Limiting Chemical Composition % of Incoloy 945 Wire:
Nickel ......…………………………………..…..45.0-55.0
Chromium ..…………………………………….19.5-23.0
Iron ……………….………………………………Balance
Molybdenum …….………………………………..3.0-4.0
Niobium .…………………………………………..2.5-4.5
Copper …………………………………………….1.5-3.0
Titanium ….………………………………………..0.5-2.5
Aluminum ….…………………………………….0.01-0.7
Manganese ...……………………………………1.0 max.
Silicon …..………………………………………..0.5 max.
Sulfur …..……………………………………….0.03 max.
Phosphorous .………………………………….0.03 max.
Carbon …..…………………………………0.005 to 0.04
Physical Properties of Incoloy 945 Wire:
Density, lb/in3………………………...………………..0.296
g/cm3 …………….……………………………..8.2
Melting Range, ºF ……………………..………2317-2510
ºC ……..………………………1270-1377
Electrical Resistivity, ohm•cmil/ft ………...…………..663
mW•m………………………….1.10
Permeability at 200 oersteds (15.9 kA/m)……...….1.003
Young's Modulus, 106psi…………………….………..29.1
GPa………………………….…..200.8
Mechanical Properties of Incoloy 945 Wire:
Incoloy alloy 945 Wire is austenitic nickel-iron-chromium alloy. It is made precipitation-hard enable by it contents of niobium, titanium, and aluminum. The precipitation hardening (age hardening) heat treatment induces the formation of Ni3(TiNbAl)-type (gama prime) and Ni3(NbTiAl)-type (gamma double-prime) precipitates. These particles are of sub-micron size and are uniformly distributed in the matrix resulting in high strength.Mechanical properties generated from commercially produced material are reported below. Higher strengths (such as might be desired for shafting) can be obtained in products that are cold worked and direct aged.
Thermal Conductivity of Incoloy 945 Wire:
Temperature | Thermal Conductivity | ||
ºC | ºF | W/m•ºC | BTU•in/ft2•h•ºF |
23 | 73 | 10.9 | 75.9 |
50 | 122 | 11.5 | 79.8 |
100 | 212 | 12.5 | 86.9 |
200 | 392 | 14.4 | 99.6 |
300 | 572 | 16.4 | 113.7 |
400 | 752 | 18.4 | 127.3 |
500 | 932 | 20.3 | 141.0 |
600 | 1112 | 22.4 | 155.1 |
700 | 1292 | 23.9 | 165.7 |
800 | 1472 | 25.7 | 178.3 |
900 | 1652 | 26.2 | 181.8 |
1000 | 1832 | 28.0 | 194.2 |
1100 | 2012 | 29.5 | 204.4 |
Wire Further Processing | Cut to length Wire |
Flat Wire | |
Square and Shaped Wire | |
Rewinding and spooling | |
Polishing and cleaning |
Product Description: The product produced by us is of good quality and is priced reasonably.
Competitive price: The labour cost and cost on procuring the raw materials is low and hence the manufacturing cost is reasonable. We provide high facility in short producing cycle and have strong adaptive capacity in producing variation of products.
High quality assured: The work done by us has a good command of advanced technological process in the respect of smelting, rolling, drawing and heat treatment up to finished products. The chemical analysis department, the physical testing department and the quality control department all operate an all-round monitoring of our products from raw materials to final products.
Packing Process & Transportation:
Packaging: Seal up, with plastic inside and wooden case or carton outside; or according to the customer's requirements.
Transportation: By air:Beijing International Airport OR By sea:Trianjin Seaport
We provide our customers with excellent services. If you want more detailed information of this product or related problems, please contact with us, we will reply as soon as possible (general in 24 hours).
