PPR Pipe Line

The structure of stable PPR pipe is to wrap avery thin aluminum strip and protective layer outside the single layerPPR pipe with thermsol adhering each layer together. Therefore thethermal shrinkage ratios of PPR is reduced greatly, so enlarge theapplication scope of the PPR pipe.

Pipe characteristics

1. Small thermal expansion coefficient, good creep resistance;
2. Uvioresistant, high temperature resistance, long service life;
3. Use standard hot melt connecting method and connecting joints, easy to install with low connection cost;
4. Widely use in hot water circulation, central air conditioner pipeline system and water supply pipe line.

What we provide

Provide advanced production line and excellent service;
Be responsible for intallation and commissioning of the productionline at customers's site and train the staff of the customers.

Production line characteristics

1. High speed and stable;
2. Equipped with high efficient special PPR extruder;
3. The line can be used to production single layer PPR pipe or PE pipe besides stable PPR multi-layer pipe;
4. Use special high strength aluminum foil adhering technique;
5. Select aluminum strip with film plating on one side or non film plating;
6. Equipped with Advance-Tech patented serveral groups of Al. Strip wrapping dies;
7. Easy to operate, complete PLC control system.

Line model	Pipe diameters (mm)	Al.foil thickness (mm)	Yield speed (m/min)	Installed capacity (KVA)	External dimensions(m) (L×W×H)	Standard
ADF-P63	20-63	0.15~0.25	1-6	120	55×5×4	CJ/T210-2005
ADF-P110	75-110	0.25~0.35	0.5-3	200	65×5×4