OnAccess700 is a managed Layer 2+ industrial Optical Ethernet switch with two 100Mbps fiber optic ports and eigth 10/100Mbps electrical ports. it is designed to meet the various industrial application needs, and provide an industrial Ethernet network communication solution with a high performance-price ratio. OnAccess 700' s high availability and reliability, as well as the rich security features, makes it ideal for secure data transmission. OnAccess700 also features powerful Web-based,CLI management capabilities, wide input range dual power supply and its support for DIN rail and panel mounting for installation in the industrial environment.
"Fast Ring Protection"(FRP) is a proprietary technology of Shenzhen First Mile Communications Ltd., designed specifically for industrial applications, to provide a fast Ethernet ring protection and recovery within 30ms.From the management console, uses can choose any port (normal Ethernet port or trunk port) to form an Ethernet ring for faster recovery and wider bandwidth.
Features
- Fast Ring Protection (FRP), Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) for Ethernet ring protection and quick recovery
- 8K address table for auto-learned unicast addresses
- 4K VLAN, supports 802.1Q, port based, protocol based VLAN, as well as Generic Attribute Registration Protocol (GARP) and GARP VLAN Registration Protocol (GVRP) for flexible network planning and management
- 13 trunk groups of up to 8 member ports for flexible load distribution control and fail-over function
- Manual, static and dynamic portStatic and dynamic port aggregation for bandwidth management
- Port rate limit, broadcast storm control, port mirroring, rich Quality of Service (QoS) features for data traffic control and management
- Blackhole MAC address filtering, static and dynamic MAC address management for network security
- Access Control Lists(ACL)
- Secure Shell (SSH) v2.0
- 802.1x
- IGMP snooping
- SNTP, SMTP
- SNMP V1, V2c, V3
- Supports RMON statistics, history, alarm and event
- Web-based network management interface
- Supports port and VLAN management
- On-line firmware upgrade
- Two privilege level accounts
- Syslog
- Dual power input for high reliability
- DIN rail or panel mounting for easy installation
Performance
- IEEE Protocol
- 802.3 10Base-T Ethernet
- 802.3u 100Base-TX and 100Base-FX fast Ethernet
- 802.3x Flow Control and Back Pressure
- 802.1p Class of Service
- 802.1Q VLAN Tag
- 802.3ad LACP
- 802.1d STP
- 802.1w RSTP
- 802.1x
- Non-blocking store-and-forward shared-memory switch architecture
- MAC address:8K
- Network management: Web-based,CLI
- Fast Ethernet Ring Protection: recovery time within 30ms
- Firmware upgrade: Web, online
Port Configuration
- RJ45 Port:
- Auto-negotiation, 10/100Base-T, Full/Half Duplex, Auto-MDI/MDIX, on copper cable of cat5# with operation distance of less than 100 meters.
- 100Base-FX Optical Port:
- Single single-mode fiber, dual wavelength 1550nm/1310nm, SC/PC connector, 15/ 40 km reach
- Dual single-mode fiber, single wavelength 1310nm or 1550nm, dual SC connector, 15/40/ 60 km reach
- Dual multimode fiber, single wavelength 1310nm, dual SC connector, 2 km reach
Fiberoptic Characteristic
Rate | Fiber Type | Operation Distance | Transmitting Wavelength | Fiber Core Diameter | TX Power | RX Sensitivity (Max) |
100Mbps | Multi-mode | 2km | 1310nm | 62.5/125um | -10~0dBm | < -28dBm |
100Mbps | Single Mode | 15km | 1310n/1550nm | 9/125um | -15~-8dBm | < -34dBm |
Power Input options
Input | Voltage | Frequency |
DC | 12~36V | N/A |
Environmental limits
- Operating Temperature:
- 0℃ ~+ 60℃(Normal Temperature)
- -40℃ ~+ 75℃( Wide Temperature)
- Storage Temperature:-40℃ ~+ 85℃
- Humidity: 10%~95%
Mechanical Dimension
- House Size: 138x113.5x60.5(mm)
- House Protection: IP30
- Installation:DIN-Rail or wall mounting
