Y30 Ferrite magnet
Ferrite magnets with low cost and wide used in loudspeaker, magnetic separator etc...... y30,y35, c5,c8
Ferrite magnets with low cost and wide used in loudspeaker, magnetic separator etc...... y30,y35, c5,c8
Applications of Ceramic Magnets
- Speaker magnets
- DC brushless motors
- Magnetic Resonance Imaging (MRI)
- Magnetos used on lawnmowers and outboard motors
- DC permanent magnet motors (used in cars)
- Separators (separate ferrous material from non-ferrous)
- Used in magnetic assemblies designed for lifting, holding, retrieving and separating
Attributes of Ceramic Material
- Least expensive material compared to alnico and rare earth magnets
- High intrinsic coercive force
- Available in simple shapes only due to manufacturing process
- Lower service temperature than alnico, greater than rare earth
- Finishing requires diamond cutting or grinding wheel
- Lower energy product than alnico and rare earth magnets
- Most common grades of ceramic are 1, 5 and 8 (1-8 possible)
- Grade 8 is the strongest ceramic material available
- Tooling can be expensive
Magnetic properties (not less)
Grade | Br, T | Hcb, kA/m | Hcm, kA/m | (BH)max, kJ/m3 |
6BI240 | 0.19 | 125 | 240 | 6.0 |
8BI220 | 0.21 | 125 | 215 | 7.0 |
22BA220 | 0.36 | 215 | 220 | 22.0 |
24BA210 | 0.37 | 205 | 210 | 24.0 |
25BA170 | 0.38 | 165 | 170 | 25.0 |
18SA220 | 0.33 | 210 | 220 | 18.0 |
27SA240 | 0.37 | 230 | 240 | 27.0 |
28SA250 | 0.39 | 240 | 250 | 28.0 |
Shapes and sizes available (as standard):
Shapes: Blocks, plates, rods/cylinders, disks, rings, arc of segments.
Two poles
Shapes: Blocks, plates, rods/cylinders, disks, rings, arc of segments.
Two poles
Standard sizes:
Blocks/plates
Min, mm | Max, mm | |
W | 5 | 100 |
T | 5 | 16 |
L | 5 | 120 |
Rods/Cylinders
Min, mm | Max, mm | |
Dia | 3 | 15 |
L | 3 | 30 |
Disks
Min, mm | Max, mm | |
Dia | 3 | 100 |
h | 3 | 5 |
Rings (isotropic)
Min, mm | Max, mm | |
OD | 5 | 45 |
ID | 3 | 30 |
h | 2 | 25 |
Rings (anisotropic)
Min, mm | Max, mm | |
OD | 36 | 135 |
ID | 18 | 60 |
h | 6 | 20 |
Arcs/segments (anisotropic)
Min, mm | Max, mm | |
W | 10 | 80 |
L | 10 | 140 |
H | 3 | 45 |