Japanese Size Compact Cylinder
HCQ2 Series (Φ32-Φ100)
1.good craft2.use De and Jp technic to design
3.well ratio of quality and price
| Specification | ||||||
| CylinderDiameter(mm) | 32 | 40 | 50 | 63 | 80 | 100 |
| Working Medium | Filtered compressed air | |||||
| Acting Mode | Double-acting | |||||
| Ensured Pressure Ressistance | 1.5MPa(15kgf/cm²) | |||||
| Highest Working Pressure | 1.0MPa(10kgf/cm²) | |||||
| Ambient and medium temperature | 5-60℃ | |||||
| Screw of rod end | Internal thread standard, External thread | |||||
| Cushion | Not Requuired | |||||
| Stroke tolerance | 0-1.0 | |||||
| Lubrication | Not Requuired | |||||
| Mounting type | Through hole(Standard); Both ends tapped | |||||
| Joint Tube Caliber | G1/8 | G1/4 | G3/8 | |||
Order Example:
1.For order of diaΦ32mm, stroke 10mm. double acting, cylinder through hole mounting type, rod endinternal thread compact cylinder.
Correct type:HCQ2B-32*10-D\
2.For order of diaΦ63mm, stroke 30mm. double acting, both ends tapped mounting type. Rod end external thread.
Correct type:HCQ2A-63*30-DM
3.For order of diaΦ80mm, stroke 50mm. double acting with magnet, both ends type, Rod end internal thread.
Correct type:HCDQ2A-80*50-D
Through hole mounting type HCQ2B+HCDQ2B
Through hole mounting type HCQ2B+HCDQ2B
Both ends tapped mounting type
| Diameter | Φf | M | K | H | C | ΦQ | ΦN |
| Φ32 | Φ60 | 34 | 14 | M8 | 13 | Φ9 7 | Φ5.5 |
| Φ40 | Φ69 | 40 | 14 | M8 | 13 | Φ9 7 | Φ5.5 |
| Φ50 | Φ86 | 50 | 18 | M10 | 15 | Φ11 8 | Φ6.6 |
| Φ63 | Φ103 | 60 | 18 | M10 | 15 | Φ14 1 0.5 | Φ9 |
| Φ80 | Φ132 | 77 | 22 | M16 | 21 | Φ17 1 3.5 | Φ11 |
| Φ100 | Φ156 | 94 | 27 | M20 | 27 | Φ17 1 3.5 | Φ11 |
Remark:
1.Standard stroke every 5mm alternation
2.The thread size of through hole type and both ends tapped is the same except special requirement.
3.(B),(P)is the size of compact-cylinder with magnet,other size is the same as compact-cylinder without magnet.
4.It can only mount one magnet switch if the stroke in 5mm.
.jpg)
.jpg)
.jpg)
.jpg)
