Product Description
Function
1. Video Recording: Resolution 640 × 480 or 720 × 480, 30 frames / sec, 16bit PCM audio, AVI file format
2. Camera: Resolution of 1280 × 1024, JPEG file format
3. Mobile Storage: USB 2.0 interface, external plug TF card can be used as U disk
4. PC Camera: State of the U disk, press any key to enter the PC camera function, without having to install drivers.
Operating Instructions
How to start?
Under power off situation, press the "on / off button"2 seconds, then release the button, till
To the yellow light, the products turn on. Then it comes into the TF card test situation,
According to different capacity of cards, test may takes about 2 seconds
1. Once and long bright yellow flash, indicating successful detection of TF card, and enters the standby state (normal operation can be done now).
2. Yellow light flash then off three times, that means the TF card can not be recognize or no card. So you need to re-plug TF card or replace TF card.
3. Yellow light flash and then off six times, means the lack of remaining capacity of TF card.
4. Yellow light flash once, then off in a second, means the battery is insufficient. It needs to be charged.
How to take pictures?
In standby situation, short press "camera / video button, " yellow light flashes, indicating a photo shoot successfully and save to TF card.
How to make a video?
1. In standby, press "camera / video button, " yellow light flashes three times then turns off, start video...
2. During the video process, press "camera / video button ", stop recording and save the video file (save the file to the TF card, will quickly flashing yellow light), yellow light, it turns into standby state.
3. During making video process, if there is no enough free space of the TF card, the camera will automatically stop recording and save the video file then turns off.
4. During making video process, if the battery is running out, it will automatically stop recording and save the video file then turns off.
How to shut down?
1. Shutdown by hand: Under the standby state, long press "on / off button"2 seconds, the yellow light goes out, the camera turns off.
2. Automatic shutdown 30seconds no operation
How to charge?
With ordinary USB cable connected to the computer to charge the battery. Please pay attention, do not take pictures and make video during connect with the computer for battery charging.
1. Slow flashing the yellow light, means it is charging.
2. Long bright yellow, indicating charging completed, you`d better charge in at least two hours to make sure the battery is fully charged.
3. Please use than 1.5 ohm resistors USB cable wire, or lithium batteries can not be completely charged.
How to display the correct time on video files?
The product has time synchronization with audio and video recording capabilities, the time can be modified according to your requirements.
To do the following:
Once it turned on, a text file named time. TXT will be created under the root directory of TF card, file content is: 2011 -05-01 23: 59: 59. Users can modify the date and time in this format and save the file, and then eject removable disk from the computer security. After a restart, this time will be saved to the product inside. Products under the battery fully charged, the time will be automatically update by itself, no need to update by hand.
How to reset?
When the product is under illegal operation or other unknown reasons cause stop responding, it can be reset.
How to do: Reset hole has a reset button, with a thin rod inserted into the reset button, click, you can reset the product.
Pay attention: Press the reset button will power off, so during making a video, press the reset button to shut down will not save video files.
1. Video Recording: Resolution 640 × 480 or 720 × 480, 30 frames / sec, 16bit PCM audio, AVI file format
2. Camera: Resolution of 1280 × 1024, JPEG file format
3. Mobile Storage: USB 2.0 interface, external plug TF card can be used as U disk
4. PC Camera: State of the U disk, press any key to enter the PC camera function, without having to install drivers.
Operating Instructions
How to start?
Under power off situation, press the "on / off button"2 seconds, then release the button, till
To the yellow light, the products turn on. Then it comes into the TF card test situation,
According to different capacity of cards, test may takes about 2 seconds
1. Once and long bright yellow flash, indicating successful detection of TF card, and enters the standby state (normal operation can be done now).
2. Yellow light flash then off three times, that means the TF card can not be recognize or no card. So you need to re-plug TF card or replace TF card.
3. Yellow light flash and then off six times, means the lack of remaining capacity of TF card.
4. Yellow light flash once, then off in a second, means the battery is insufficient. It needs to be charged.
How to take pictures?
In standby situation, short press "camera / video button, " yellow light flashes, indicating a photo shoot successfully and save to TF card.
How to make a video?
1. In standby, press "camera / video button, " yellow light flashes three times then turns off, start video...
2. During the video process, press "camera / video button ", stop recording and save the video file (save the file to the TF card, will quickly flashing yellow light), yellow light, it turns into standby state.
3. During making video process, if there is no enough free space of the TF card, the camera will automatically stop recording and save the video file then turns off.
4. During making video process, if the battery is running out, it will automatically stop recording and save the video file then turns off.
How to shut down?
1. Shutdown by hand: Under the standby state, long press "on / off button"2 seconds, the yellow light goes out, the camera turns off.
2. Automatic shutdown 30seconds no operation
How to charge?
With ordinary USB cable connected to the computer to charge the battery. Please pay attention, do not take pictures and make video during connect with the computer for battery charging.
1. Slow flashing the yellow light, means it is charging.
2. Long bright yellow, indicating charging completed, you`d better charge in at least two hours to make sure the battery is fully charged.
3. Please use than 1.5 ohm resistors USB cable wire, or lithium batteries can not be completely charged.
How to display the correct time on video files?
The product has time synchronization with audio and video recording capabilities, the time can be modified according to your requirements.
To do the following:
Once it turned on, a text file named time. TXT will be created under the root directory of TF card, file content is: 2011 -05-01 23: 59: 59. Users can modify the date and time in this format and save the file, and then eject removable disk from the computer security. After a restart, this time will be saved to the product inside. Products under the battery fully charged, the time will be automatically update by itself, no need to update by hand.
How to reset?
When the product is under illegal operation or other unknown reasons cause stop responding, it can be reset.
How to do: Reset hole has a reset button, with a thin rod inserted into the reset button, click, you can reset the product.
Pay attention: Press the reset button will power off, so during making a video, press the reset button to shut down will not save video files.
