XKP-400 Rubber Crusher
The rubber crusher machine is mainly by the body's transmission part, and security device, roller, lubricating system and accident parking equipment etc.
2.Before and after the machine's main rollers for working parts, through the motor, slow down, device transmission, in a certain ratio, at work on rotation.
3. The rollers work surfaces for cold hard cast iron is made, hard, wear-resisting, long service life, on both ends of the rollers by sliding bearing support, using the injector lubrication. The distance between two roller, within a prescribed scope can be arbitrarily regulate, and the installation is safety device, a overload safety work of broken, to protect the main parts not by the overload and damage. The machine is at fault, pull the lever parking accident device, the machine can rapidly stop working.
4. In the rollers work at both ends of a block rubber board.
5. The rollers parts equipped with cooling device is used to regulate the roller surface temperature.
| Model | XKP-400 | XKP-450 | XKP-560 |
| Diameter of roller(mm) | 400 | 450 | 560 frontroller -510rear roller |
| Length of roller(mm) | 600 | 650 | 800 |
| Liner speed of front roller(m/min) | 18.36 | 24.5 | 25.6 |
| Friction ratio of roller | 1:1.27 | 1:1.27 | 1:1.30 |
| output(kg) | 200-400 | 400-600 | 2000 |
| Motor power(kw) | 37 | 55 | 75 |
| L*W*H(mm) | 3320*1900*1850 | 4650×2000×1550 | 4750×2300×2000 |
| Weight(kg) | 7000 | 11000 | 18500 |
XKP-400 Rubber crusher machine cracker mill
