QTJ4-40 block machine specification :
block Size(mm) | forming blocks (pcs) | molding cycle | Capacity/8hours |
390×190×190 | 4 | 35-40 | 2400-2800 |
390×240×190 | 3 | 35-40 | 1800-2100 |
240 ×115×53 | 26 | 35-40 | 17000-18000 |
Motor Power
Lift motor: 6-2.2kw one set
On vibrators: 2.2kw one set
Under the vibrator: 2.2kw two sets
Vibrator adjustment: During using, the user according to different materials, different materials slump should adjust the vibration force
Lift motor: 6-2.2kw one set
On vibrators: 2.2kw one set
Under the vibrator: 2.2kw two sets
Vibrator adjustment: During using, the user according to different materials, different materials slump should adjust the vibration force
Method of using
1 Check whether all parts of mechanical loosening, lubricating oil injection site should be to reduce the mechanical friction, thus extending the service life .
2 Power, in accordance with switch position toggle switch on the handle upward, the head mount: the model case coincides with the head several times to check smoothly .
3 Toggle switch rise until the pressure head hanging, the mold box down to the wooden pallet and began feeding. Combined with a little higher than the mold box, start the next shock vibrator about 3-6 seconds, the extra level of material scraped from the mold box .
4 To fall on the head after the first shock on the next switch, then start on the shock switch until the limit stuck on the limit sleeve block, turn off the switch under the shock, and flip the mode switch box hanging rise housing, use a brick to brick forklift launch to complete the cycle and so on.
2 Power, in accordance with switch position toggle switch on the handle upward, the head mount: the model case coincides with the head several times to check smoothly .
3 Toggle switch rise until the pressure head hanging, the mold box down to the wooden pallet and began feeding. Combined with a little higher than the mold box, start the next shock vibrator about 3-6 seconds, the extra level of material scraped from the mold box .
4 To fall on the head after the first shock on the next switch, then start on the shock switch until the limit stuck on the limit sleeve block, turn off the switch under the shock, and flip the mode switch box hanging rise housing, use a brick to brick forklift launch to complete the cycle and so on.
Replacement mold:
1 Putting up on the head with the separation of the mold box, in the mold box above to put a piece of wood rose to head contact, pulling the hook out, the next model down to the wooden pallets on the box, remove the screw head
2. To hang on rails, boxes down to the lower mold on wooden pallets, raised the pressure head aside
3 Removal of the mold box positioning rod screw, carried out of the lower die box diagonal
4 Install the mold and remove mold
2. To hang on rails, boxes down to the lower mold on wooden pallets, raised the pressure head aside
3 Removal of the mold box positioning rod screw, carried out of the lower die box diagonal
4 Install the mold and remove mold
.jpg)
.jpg)
