S Series
1.Combines Line to Ground interference rejection filters with additional circuitry to reduce Line to Line noise and transients2.Designed for use when equipment impedance at RF frequencies is high
3.Effective for use with switch-mode power supplies
4.Effective when used to control emissions in equipment using SCR and T2L circuits for compliance with FCC Part 15, Subpart J and EN55022, Level A, down to 150kHz
Ordering Information
Available Part Number
| Corcom Catalog Part Number: | 3VS1 | |
| TE Part Number: | 6609042-1 | |
| EMF/RFI Filter(s) | ||
| Corcom Catalog Part Number: | 6VS1 | |
| TE Part Number: | 6609042-2 | |
| EMF/RFI Filter(s) | ||
| Corcom Catalog Part Number: | 20VS6 | |
| TE Part Number: | 6609042-5 | |
| 20 Amp standard leakage S Series with stud terminals | ||
| UL Recognized / CSA Certified / VDE Approved | ||
| Corcom Catalog Part Number: | 10VS1 | |
| TE Part Number: | 6609042-3 | |
| 10 Amp standard leakage S Series with 1/4 quick connect terminals | ||
| UL Recognized / CSA Certified / VDE Approved | ||
| Corcom Catalog Part Number: | 20VS1 | |
| TE Part Number: | 6609042-4 | |
| 20 Amp standard leakage S Series with 1/4 quick connect terminals | ||
| UL Recognized / CSA Certified / VDE Approved | ||
| Corcom Catalog Part Number: | 60VS6 | |
| TE Part Number: | 1609042-6 | |
| 60 Amp standard leakage S Series with 1/4 - 20 stud terminals | ||
| UL Recognized / CSA Certified / VDE Approved | ||
Specifications
| Maximum leakage current, each Line to Ground: | |||
| 3 to 20 Amp | 60 Amp | ||
| @ 120 VAC 60 Hz | .4 mA | .75 mA | |
| @ 250 VAC 50 Hz | .7 mA | 1.25 mA | |
| Hipot rating (one minute): | |||
| Line to Ground | 2250 VDC | ||
| Line to Line | 1450 VDC | ||
| Operating Frequency: | 50 / 60 Hz | ||
| Rated voltage (max.): | 250 VAC | ||
| Rated Current: | 3A to 60A | ||
| Operating Ambient Temperature Range (at rated current Ir): | |||
| -10°C to +40°C | |||
| In an ambient temperature (Ta) higher than +40°C the maximum operating current (Io) is calculated as follows: Io = Ir √(85-Ta)/45 | |||
Electrical Schematics
3, 6, 10VS
20VS
60VS
Case Styles
S1 (3, 6, 10A)
| Typical Dimensions: | ||
| Line/Load Terminals(4): | .250 [6.3] with .07 [1.8] Dia. hole | |
| Ground Terminal(1): | .250 [6.3] with .07 x .16 [1.8 x 3.8] slot | |
| Mounting Holes (2): | .188 [4.75] Dia. | |
| Typical Dimensions: | ||
| Line/Load Terminals(4): | .250 [6.3] with .07 [1.8] Dia. hole | |
| Ground Terminal(1): | .250 [6.3] with .07 x .16 [1.8 x 3.8] slot | |
| Mounting Slots(4): | .250 x .156 [6.35 x 3.96] Dia. | |
20VS6
| Typical Dimensions: | ||
| Terminals (5): | 8-32 Torque 18 lbf-in. [2.03 N-m] max. ±2[..22] | |
| Mounting Slots(4): | .250 x .156 [6.35 x 3.96] Dia. | |
60VS6
| Typical Dimensions: | ||
| Terminals (5): | 1/4-20 Torque 56 lbf-in. [6.32 N-m] max. ±2[..22] | |
| Mounting Holes (4): | .218 [5.53] Dia. ± .006 [.152] | |
Case Dimensions
| Part No. | A | B | C | D | E |
| (max.) | (max.) | (max.) | ± .015 | (max.) | |
| ± .38 | |||||
| 3VS1 | 3.36 | 1.82 | 1.16 | 2.375 | 2.78 |
| 85.3 | 46.2 | 29.5 | 60.33 | 70.6 | |
| 6VS1, 10VS1 | 3.86 | 2.08 | 1.53 | 2.938 | 3.34 |
| 98.0 | 52.8 | 38.9 | 74.63 | 84.8 | |
| 20VS1 | 5.23 | 3.38 | 1.53 | 3.75 | 4.20 |
| 132.8 | 85.9 | 38.9 | 95.25 | 106.7 | |
| 20VS6 | 5.34 | 3.38 | 1.53 | 3.75 | 4.20 |
| 132.8 | 85.9 | 38.9 | 95.25 | 106.7 | |
| 60VS6 | 7.2 | 3.08 | 2.28 | 5.63 | 6.28 |
| 182.88 | 78.23 | 57.91 | 142.87 | 158.78 |
