The drilling mud centrifuge is driven by two motors. The main motor drives the drum and reducer case rotate by the belts. The vice motor drives the spiral through the reducer. The drum and spiral rotate together for the same direction, and produce some difference of speed. Separate the solid phases in the drilling mud by the centrifugal sedimentation principle. The drilling mud flows into the drum tfrom the fluid hole through the inlet pipe and under the force of screw pusher, under the effect of centrifugal force, the solid phases will be pushed onto the inside wall of the drum, pass the impeller on the screw pusher and be discharged from the exhaust hole at the small side of the drum. The liquid phase will flow out from the big side. The drilling fluid recircles like above to achieve the target of continuous separation.
Dachuan Machinery designed the centrifuge which is especially for the separation of solid and liquid phase based on the characteristics of drilling fluid and large amount of location test. The centrifuge can decrease the quantity of solid particles in drilling fluid, control the density and viscosity to guarantee the performance of drilling mud and it is good for the quick well drilling.
1. The material feeding, centrifugal sediment and material unloading can be finished when the centrifuge is running. The automation degree is high.
2. Optimized the technical parameters of the sediment area and feeding methods, the degritting efficiency has been high enhanced, the performance can compare favourably with the imported centrifuge with the same specification.
3. The working accuracy and dynamic balancing precision of the rotating part has been enhanced to make the centrifuge has the advantage of low vibration and little noisey.
4. The production capacity of the single machine is large, the structure is impact. The centrifuge takes a little area and can keep longterm ruanning. The mantenance is easy and convenient and it is possible to operate closed.
5. Simplified the whole mud system, the energy consumption is low, the work load is light, but the cleaning efficiency has increased 30%.
6. Use the frequency conversion governor, compared with the kindred products, our centrifuge has the adcantage of low energy consumption and the adjustable work speed.
LW Centrifuge Parameters
| TYPE | DCLW450-842N | DCLW450-1000N | DCLW600-1019N | DCLW700-1200N |
|---|---|---|---|---|
| Drum Diameter mm | 450 | 450 | 600 | 700 |
| Drum length mm | 842 | 1000 | 1019 | 1200 |
| Drum Rotate Speed r/min | 2200 | 2000 | 1800 | 1500 |
| Separation Factor | 870 | 860 | 850 | 823 |
| Separation Point μm | 5~7 | |||
| Motor Power(Main) | 22kw | 30kw | 45kw | 55kw |
| Motor Power (Vice) | 5.5kw | 7.5kw | 7.5kw | 11kw |
| Power Of Fluid Supply Pump | 5.5KW | 5.5KW | 7.5kw | 11kw |
| Maxmum Thruput m3/h3/h | 40 | 40 | 60 | 90 |
| Weight kg | 2800 | 3000 | 3600 | 4300 |
| Size mm | 2450×1750×1350 | 2600×1750×1350 | 2900×1600×900 | 3100×1700×950 |
GLW Centrifuge Parameters
| TYPE | DCGLW250-980N | DCGLW355-1257N | DCGLW450X1258N | DCGLW600X1200N |
|---|---|---|---|---|
| Drum Diameter mm | 250 | 355 | 450 | 600 |
| Drum Length mm | 980 | 1257 | 1258 | 1200 |
| Drum Rotate Speed r/min | 3500 | 3200 | 3000 | 2600 |
| Separation Factor | 2607 | 2035 | 2260 | 2550 |
| Separation Point μm | 2~5 | |||
| Motor Power (Main) | 11kw | 37kw | 37kw | 45kw |
| Motor Power (Vice) | 7.5kw | 11kw | 11kw | |
| Power Of Fluid Supply Pump | 2.2KW | 5.5KW | 7.5kw | 11kw |
| Maxmum Thruput m3/h3/h | 20 | 35 | 45 | 90 |
| Weight kg | 1000 | 2950 | 3100 | 4300 |
| SIZE mm | 1900×1200 ×800 | 2900×1850×1400 | 2900×1900×1450 | 3200×1600×900 |
You are welcome to contact Tangshan Dachuan Machinery to get more detailed infos, we will supply our best service for you.
Note:DCGLW centrifuge can be made with power frequency or frequency conversion according to the requirement of the customers.
