Photothermolysis Co2 Fractional Laser Beauty Equipment for Wrinkle Removal US900
I.Theory
This technology is known as Fractional Photothermolysis theory (dot-matrix light and heat decomposition), the 10.6μm far-infrared laser will evenly mark with tiny holes, and then cause a series biochemical reactions inside the skin, thus to reach the results of skin lifting & resurfacing, pigments and scar removal, etc, finally let the skin return to young again.
II.Applications:
1. Skin renewing and resurfacing
2. Wrinkle removal, skin tightening
3. Acne and acne scar removal
4. Smooth burnt scars and surgery scars, etc
5. Remove intractable chloasmas and pigmentation
6. Sun damage recovery
III.Features:
1. Particular designed intelligent laser control system ensures a precise treatment
2. Laser energy shooting is an even steady and safe treatment process.
3. Wide range application, effective treatment
4. Easy and fast treatment, no down time.
IV.Parameters:
|
Basic specification |
|
|
Wavelength |
10.6μm, far-infrared laser |
|
Control |
LCD 8.4 inch |
|
Pulse frequency |
33.3 Hz |
|
Duration |
0.1~10 ms |
|
Distance |
0.1~2.6 mm |
|
Interval |
0~6s |
|
Repeat |
1~5000ms |
|
overlap |
1~20 times |
|
Average power |
25W |
|
Working mode: |
Continuous pulse, single pulse, interval pulse |
|
Scan Graphics |
Square, rectangle, round, triangle, oval, 6-diamond shape, line |
|
Dot quantity |
400 dots at most |
|
Working state |
Hyper-pulsed mode |
|
Scan mode |
Sequence scan, Random scan, maximum distance scan |
|
Pulse energy |
10mj to 130mj is optional for each dot. |
|
Technical specification |
|
|
Condenser focus |
f=50mm |
|
Beam divergence angle |
0.3 mrad |
|
Spot size |
0.2 mm |
|
Aiming beam |
Less than 2mW, 635nm red semiconductor laser |
|
Cooling system |
Closed loop circulating water + air cooling |
|
Environment temperature |
5-400C |
|
Relative humidity |
80% |
|
Temperature in transit |
-40-500C |
|
Humidity in transit |
85% |
|
Beam transport device |
Articulated arm with 7-joint and balance weight |
|
Atmospheric pressure |
86.0kpa-106.0kpa |
|
Warming up time |
2 min |
|
Electromagnetic requirement |
No electromagnetic |
|
Field interference |
|
|
N. weight (kg) |
28kg |
|
Power supply |
220V/110V |
