Welcome to visit keba Industrial!
BriefIntroduction:
We are delighted to announce that the leading manufacturer of the artificialthatch in China,
China KEBA Group have developed the new product--- Plastic Artificial Thatch.
ThePlastic Artificial Thatch is made of polyvinyl chloride (PVC) resin,added with plasticizers,
anti-UV and anti-aging additive, stabilizer and other processing aids. Makingit fire proof and anti aging.
Plastic Artificial Thatchhas a tensile strength, elongation, goodstability, small shrinkage, low temperature
and good flexibility, good aging resistance and long service life.
Features:
1.Plastic Artificial Thatch comes with a 20 year limited warranty.
2. No special skills are required, easy installation.
3. Maintenance free asPlastic Artificial Thatch does not decay, shed ormold.
4.Plastic Artificial Thatch is resistant to birds, termites and otherpests.
5.Plastic Artificial Thatch comes standard with an inherent Class A FireRetardant.
6. A variegated coloration of natural browns and tans that are UVprotected.
Packing:
Currently, we provide two types of the packing cartons.
| [ 6MM*250MM*460MM ] | [ 6MM*500MM*460MM ] |
20'GP(432Cartons,48pcs/pcarton)carton size:470mm*510mm*260mm; 40'GP(900Cartons,48pcs/pcarton)carton size:470mm*510mm*260mm; 40'HQ(1100Cartons,48pcs/pcarton)carton size:470mm*510mm*260mm; | 20'GP(432Cartons,24pcs/pcarton)carton size:470mm*510mm*260mm; 40'GP(900Cartons,24pcs/pcarton)carton size:470mm*510mm*260mm; 40'HQ(1100Cartons,24pcs/pcarton)cartonsize:470mm*510mm*260mm; |
Applications:
Create an authentic tropical look in your garden
Create an entertainment area next to your pool
Cover your spa
Cover your BBQ area
Create a tropical look in pubs, Restaurants, etc.
Square Gazebo Installation Instructionsmethod:
1.Assembling the Frame
2.On a flat area lay out mitred 100 x 100 beams and screw together. Ensurediagonal measurements are the same and brac e when square.
3.Fix with 75mm nails the opposing pre-drilled shorter rafters to centralblock and to beams where marked. Then fix hip rafters (long) to central blockand corners. Sight hip rafters and brace straight if slightly bent.
4.Place purlins on rafters and raise and lower till they join in the centreof the hip rafters and are parallel with the lines of the beams. Drill and fixwith 65mm nails. Remove braces and fix bottom and top purlins in same manner.Posts – Place structure in desired situation and mark on ground the corners ofthe beams. Points 90mm diagonally in are the centres of 250mm diameter holes.Move framing and dig holes 600mm deep and ensure that the bottoms of the holesare clean and level.
5.With packers or large wedges hold posts (2.7 x 125mm square) approximatelyplumb in holes and mark a level point from post to post 2.1m from ground. Removepost one by one and cut off squarely at this mark (Do not mix posts as holeswill vary in depth) and replace in holes. 6.Plumb and securely brace one post,temporarily plumb remainder with packers and lift roof structure into place (youwill need some help). Fix with 100mm nails, (skewed) four per post, pre-drillingholes. Plumb remaining posts, brace to hold firm and concrete in place.
