Railway railings gate used for railway on both sides of the isolation protective facilities on isolation and protection of the role of hulanwang products, it has been widely used in highway, railway, landfill site test site, durable, beautiful, eye shot is open, the excellent isolation performance.
The pieces of the railway railings are treated: after cleaning, polishing and passivation, vulcanization technology, the plastic plating processing, the color for fruit green, coating thickness is 0.5 ~ 0.6 mm, plating powder using anti-aging performance better import weathering tree cosmetics material, coating must be the same color, smooth surface,
Does not allow to have the sagging, drop tumor or redundant agglomeration. A plating surface should be no leakage defects such as iron plating, dew.
Railway railings are divided into:
Flat steel bars
Appearance size 1960 x 2790 mm screen frame: square tube 60 × 40 x 2.5 mm, right and left tube 40 x 40 x 2.5 mm, intermediate welding 40 x 3 flat steel, four word stiffener is 40 x 4 flat steel, length respectively for 1000 and 1200 mm.
Piece surface jinsu (green), request thickness 0.8-1.2 mm, uniform coating, same color, smooth surface, no sag, drip, powder bubble, crack defects such as. A flowing solder joints, or so two points, behind a bit, joint length 10-15 mm; The mouth solder joints, or so two points, the middle
Point, joint length 10-15 mm. Reinforcement and square tube between full welding, the welding request firmly. After clear welding slag, weld crater to smooth. After piece become warped degree is not more than 8 mm.
Angle fence
1, appearance size for 1750 x 2750 mm
2, border using 40 x 25 x 3.0 mm of Angle steel made
3, piece by the diameter of 4.0 mm or 3.5 mm steel wire welding and into
4, mesh 75 x 150 or 50 x 100 mm
5, connectors used 40 x 55 x 8.0 mm steel system Into
6, metal mesh should undertake after galvanized anti-corrosion jinsu processing
7, isolation fence in the relief of set, can repair the ground into certain longitudinal slope, with metal net made certain angles parallelogram along the slope Settings, also can adjust column high speed and connection
2, border using 40 x 25 x 3.0 mm of Angle steel made
3, piece by the diameter of 4.0 mm or 3.5 mm steel wire welding and into
4, mesh 75 x 150 or 50 x 100 mm
5, connectors used 40 x 55 x 8.0 mm steel system Into
6, metal mesh should undertake after galvanized anti-corrosion jinsu processing
7, isolation fence in the relief of set, can repair the ground into certain longitudinal slope, with metal net made certain angles parallelogram along the slope Settings, also can adjust column high speed and connection
A position, will isolation fence made stepped
Rectangular tube fence
1. Appearance size for 1700 x 3000 mm (post center distance)
2. Border is 30 × 50 x 2.0 MMD the moment control into
3. Piece have diameter is 4.0 mm steel wire welding and into
4. Mesh 75 x 150 mm
5. The post 40 x 40 x 2.5 mm party control into post, piece link plate with 90 degree Angle, thickness of 4.0 mm steel plate system Into
6. Metal mesh should undertake after galvanized anti-corrosion jinsu processing
7. Protective fence installation to do "strict, straight, neat, beautiful", the line closed tight, there is no clearance; Along the route direction suitable straight, not suddenly far and near, Protective fence top and bottom longitudinal transition smooth straight, don't fluctuation; Request overall effect beautiful, avoid messy feeling. Before installation should level off site, the bottom of the fence distance ground height according to 10 cm design, don't meet should be carried out when the backfill.used for railway on both sides of the isolation protective facilities on isolation and protection of the role of hulanwang products, it has been widely used in highway, railway, landfill site test site, durable, beautiful, eye shot is open, the excellent isolation performance.
3. Piece have diameter is 4.0 mm steel wire welding and into
4. Mesh 75 x 150 mm
5. The post 40 x 40 x 2.5 mm party control into post, piece link plate with 90 degree Angle, thickness of 4.0 mm steel plate system Into
6. Metal mesh should undertake after galvanized anti-corrosion jinsu processing
7. Protective fence installation to do "strict, straight, neat, beautiful", the line closed tight, there is no clearance; Along the route direction suitable straight, not suddenly far and near, Protective fence top and bottom longitudinal transition smooth straight, don't fluctuation; Request overall effect beautiful, avoid messy feeling. Before installation should level off site, the bottom of the fence distance ground height according to 10 cm design, don't meet should be carried out when the backfill.used for railway on both sides of the isolation protective facilities on isolation and protection of the role of hulanwang products, it has been widely used in highway, railway, landfill site test site, durable, beautiful, eye shot is open, the excellent isolation performance.
Piece the preservative treatment: after cleaning, polishing and passivation, vulcanization technology, the plastic plating processing, the color for fruit green, coating thickness is 0.5 ~ 0.6 mm, plating powder using anti-aging performance better import weathering tree cosmetics material, coating must be the same color, smooth surface,
Does not allow to have the sagging, drop tumor or redundant agglomeration. A plating surface should be no leakage defects such as iron plating, dew.
Railway isolation gate is divided into:
Flat steel bars
Appearance size 1960 x 2790 mm screen frame: square tube 60 × 40 x 2.5 mm, right and left tube 40 x 40 x 2.5 mm, intermediate welding 40 x 3 flat steel, four word stiffener is 40 x 4 flat steel, length respectively for 1000 and 1200 mm.
Piece surface jinsu (green), request thickness 0.8-1.2 mm, uniform coating, same color, smooth surface, no sag, drip, powder bubble, crack defects such as. A flowing solder joints, or so two points, behind a bit, joint length 10-15 mm; The mouth solder joints, or so two points, the middle
Point, joint length 10-15 mm. Reinforcement and square tube between full welding, the welding request firmly. After clear welding slag, weld crater to smooth. After piece become warped degree is not more than 8 mm.
Angle fence
1, appearance size for 1750 x 2750 mm 2, border using 40 x 25 x 3.0 mm of Angle steel made 3, piece by the diameter of 4.0 mm or 3.5 mm steel wire welding and into 4, mesh 75 x 150 or 50 x 100 mm 5, connectors used 40 x 55 x 8.0 mm steel system
Into 6, metal mesh should undertake after galvanized anti-corrosion jinsu processing 7, isolation fence in the relief of set, can repair the ground into certain longitudinal slope, with metal net made certain angles parallelogram along the slope Settings, also can adjust column high speed and connection
A position, will isolation fence made stepped
Rectangular tube fence
1. Appearance size for 1700 x 3000 mm (post center distance)
2. Border is 30 × 50 x 2.0 MMD the moment control into 3. Piece have diameter is 4.0 mm steel wire welding and into 4. Mesh 75 x 150 mm 5. The post 40 x 40 x 2.5 mm party control into post, piece link plate with 90 degree Angle, thickness of 4.0 mm steel plate system Into 6. Metal mesh should undertake after galvanized anti-corrosion jinsu processing 7. Protective fence installation to do "strict, straight, neat, beautiful", the line closed tight, there is no clearance; Along the route direction suitable straight, not suddenly far and near, Protective fence top and bottom longitudinal transition smooth straight, don't fluctuation; Request overall effect beautiful, avoid messy feeling. Before installation should level off site, the bottom of the fence distance ground height according to 10 cm design, don't meet should be carried out when the backfill.
Plastic coated metal rainway railing
Plastic Coated Metal Rainway Guardrail
Plastic coated metal rainway railing
Plastic Coated Metal Rainway Guardrail
