Brief introduction:
JPQ series of Lubrication Divider Block are made of carbon alloy structural steel as top element and end element with combination of 3 to 8 depending on design requirements for oil and the oil port number middle elemts .
The middle elements of each series in addition to the series to the oil minimum specifications (including single - port and dual output ports ) , other specifications have with the type of cycle indicator.
The middle elements of each series in addition to the series to the oil minimum specifications (including single - port and dual output ports ) , other specifications have with the type of cycle indicator.
Ordering code:
JPQ 2 - 2 32T
JPQ2= JPQ2 series lubrication divider block
2= Numbers of middle elements
32T= Middle element type (Refer to technical specification)
Specification:
Divider Series | JPQ1 | JPQ2 | JPQ3 | |
Nominal pressure (bar) | 200 | |||
Starting pressure (bar) | 7 | 12 | ||
Max. lubricating frequency (/min ) | 200 | |||
Middle element type | 8T 8S | 16T 16S | 40T 40S | |
16T 16S | 24T 24S | 80T 80S | ||
24T 24S | 32T 32S | 120T 120S | ||
40T 40S | 160T 160S | |||
48T 48S | 200T 200S | |||
56T 56S | 240T 240S | |||
1. The piston of one middle element reciprocating a double stroke of one cycle, each middle element of a dispenser operation time cycle is the station distributor one cycle, one distributor block of the middle element in the unit time . the number of cycles and the operating frequency of the distributor block .
2. The working environment temperature should be at -30 ~ +80℃.
3. Use the media for not less than 290 cone penetration (25 ° C , 150g ) 1/10mm the filtering accuracy not less than 100mm of grease or viscosity of not less than 17cSt the filtering accuracy not less than 25μm lubricants.
2. The working environment temperature should be at -30 ~ +80℃.
3. Use the media for not less than 290 cone penetration (25 ° C , 150g ) 1/10mm the filtering accuracy not less than 100mm of grease or viscosity of not less than 17cSt the filtering accuracy not less than 25μm lubricants.
Grease Volume And Outlet Number Of Middle Elements
Middle element type | 8T | 8S | 16T | 16S | 24T | 24S | 32T | 32S | 40T | 40S | 48T | 48S |
Each outlet volume (ml/cycle) | 0.08 | 0.16 | 0.16 | 0.32 | 0.24 | 0.48 | 0.32 | 0.64 | 0.40 | 0.80 | 0.48 | 0.96 |
Numbers of elements | 2 | 1 | 2 | 1 | 2 | 1 | 2 | 1 | 2 | 1 | 2 | 1 |
Middle element type | 56T | 56S | 80T | 80S | 120T | 120S | 160T | 160S | 200T | 200S | 240T | 240S |
Each outlet volume (ml/cycle) | 0.56 | 1.12 | 0.80 | 1.60 | 1.20 | 2.40 | 1.60 | 3.20 | 200 | 4.00 | 2.40 | 4.80 |
Numbers of elements | 2 | 1 | 2 | 1 | 2 | 1 | 2 | 1 | 2 | 1 | 2 | 1 |
JPQ series of Lubrication Divider Block Dimensions:
JPQ1 Series and JPQ3 Series Oil Lubricant Distributor Type and Dimensions:
