Non-magnetic SUS305 austenitic Stainless Steel Coils for spiral wound gasket and seal
SUS305 cold rolled stainless steel strip with thickness:0.05-0.8mm width:4-600mm Thickness tolerance: +/-0.005mm HV160-400 Surface:2B BA
Description:
SUS305 austenitic stainless steel. And 304, high nickel. The welding parts bent functional excellent. Electronic components with non-magnetic and cold formability, suitable for deep processing. Features: 1) good weldability; 2) bending performance; 3) after heat treatment hardening; 4) non-magnetic.
SUS305 stainless steel, a strong corrosion resistance alloy, the hardening rate is low, and applies to the depth of stamping and spinning forming.
SUS305 (18Cr-12Ni-0.1C), compared with 304 steel, low work hardening. For Spinning processing, special drawing and cold repression. Austenitic stainless steel. And 304, high nickel. Welding position bending, excellent functional.
Applications:
Mainly used for electronics, computer accessories, stationery, kitchen utensils, medical equipment, stainless steel etching materials, chemical packing, needle material,spiral wound gasket, seal.
In condition,used for Scope - chemical containers, machinery and equipment parts, heat-resistant equipment components, cryogenic vessels parts . SUS305 than 304 nickel metal content, timeliness and Drawability of more than 304 excellent, widely used in a variety of applications.
Also used for chemical containers, machinery and equipment parts, heat-resistant equipment components, cryogenic vessels parts.
Type: the non-magnetic Constant Spring, shrapnel, after the formation of products soft ribbons.
Specifications:
Chemical composition:
C |
Si |
Mn |
Cr |
P |
S |
Ni |
≤0.12 |
≤0.75 |
≤2.0 |
17~19 |
≤0.045 |
≤0.030 |
10.5~13.0 |
Mechanical Properties:
YS(MPa) |
TS(MPa) |
EL |
Density |
Hardness |
Specific heatC(20) |
Resistivity |
Melting point |
Area reduction(%) |
≥175 |
≥480 |
≥40 |
7.93g/cm3 |
<=187HB,<=90HRB,<=200HV |
0.502J*(g.c)-1 |
0.73*mm2*m-1 |
1398~1420 |
≥40 |
Temperature |
20 |
100 |
500 |
|