IntroductionCorrugated cardboard production line includes mill roll stand, single facer, pre-heater, conveyer bridge, gluing machine, slitter scorer machine, cut off machine and stacker. We can produce the three ply, five ply and seven ply corrugated cardboard production line, Widths from 1400 to 2500mm\min,production speeds from 60 to 250 meters/min Customer's can choose according his own needs. We can provide a complete production line and can also provide individual parts to complete customer's own line.
Common Design Chart
Equipments List
Equipments Name | MJT-60-1600 Economical | MJT-80-1600 Standard | MJT-100-1600 High-speed |
Mechanical Roll Stand (include the paper roll rail.) | 2 | 2 | |
Hydraulic Roll Stand (include the paper roll rail.) | 3 | ||
Pre-heater Ф400mm (Up) | 1 | 2 | |
Pre-heater Ф600mm (Ground) | 2 | ||
Vacuum Single Facer (RollФ280), gimbal drive | 1 | 1 | |
Vacuum Single Facer (RollФ320), gimbal drive | 1 | ||
Transport Bridge (Electrical adjust the precision, vacuum tighten and loosen.) | 1 | 1 | |
Heavy model transport bridge (Electrical adjust the precision, vacuum tighten and loosen.) | 1 | ||
Double preheater Ф400mm | 1 | 1 | |
Double preheater Ф600mm | 1 | ||
Double Gluer - A | 1 | 1 | |
Double Gluer - B | 1 | ||
Double baker (600mm X9heat plates, 4.5meter cooling part.) | 1 | ||
Double baker (600mm X11heat plates, 5meter cooling part.) | 1 | ||
Double baker (600mm X14heat plates, 6meter cooling part.) | 1 | ||
Thin Blade (Simple electrical adjust.) | 1 | ||
High-Speed Thin Blade(Electrical up and down, electrical adjust the precision.) | 1 | 1 | |
Mechanical Cutter | 1 | ||
NC Cutter (Servo, straight knife.) | 1 | 1 | |
Conveyor and Stacker | 1 | ||
Paperboard booking machine | 1 | ||
Glue system | 1 | 1 | 1 |
Steam system (not include the boiler and pipes.) | 1 | 1 | 1 |
TECHNOLOGICAL PARAMETERS
Technological Parameters | MJT-60-1800 Economical model | MJT-80-1800 Standard model | MJT-100-1800 High-Speed |
Line size L*W*H(m) | 32×3.6×4.5 | 36×3.6×4.5 | 48×4×4.5 |
Factory size L*W*H(m) | 35×11×4.5 | 40×11×4.5 | 55×11×4.5 |
Steam cost | 0.8~1.2Mpa About 2T/h | 0.8~1.2Mpa About 2T/h | 0.8~1.2Mpa About 2T/h |
Starch Cost (g/m2) | 11-13 | 11-13 | 11-13 |
Raw paper width (mm) | 1600 | 1600 | 1600 |
Mechanical Speed | 60m/min | 80m/min | 100m/min |
Economical speed | 45m/min | 50m/min | 80m/min |
Shift capacity (*104m/8h) | 2.5 | 3 | 5 |
Transversely cutting precision | ±2.5 | ±1 | ±1 |
Transversely cutting scope (mm) | 600-2600 | 500-9999 | 500-9999 |
Slitting scope (mm) | 145-1600 | 145-1600 | 160-1600 |
Slitting precision (mm) | ±1 | ±1 | ±1 |
Workers | 6-9 | 6-9 | 6-9 |
Note: Above parameters are for your reference. It depends on the different machines you choose.
.jpg)
.gif)
.jpg)
