Characteristic:
1.5 Working Modes
2.3 Fan Speed
3.Accurate And Stable Temperature Control
4.Accurate And Stable Auto Fan
5.Double Sensors
6.Timer on/off
7.Sleep Function
8.Defrost Automatically
9.Compressor Project Timer For its Run And Stop
10.Prevent Cold Wind In Heating Mode
11.updated reciever,good looking appearance,show intuitional
12.updated transformer,quick plug, easy for installation
Manual
Note:When the compressor is shut off,it needs 3 minutes to restart.
Mode selection key:Select working mode.When in auto mode,the system will work like heat mode if the room temperature is below 21℃,or work cool mode if room temperature is up than 27℃..
Fan selection key:Selection fan speed.The fan speed will be low when in dry mode,or in heat mode but the compressor is shut off,or in heat mode but the compressor working time less than 3 minutes.In auto fan mode,the fan speed will be high if the difference of setting and room temperature big than 4℃,will be low if the difference less than 2℃.
Temperature setting keys:Be able to set from 15℃~30℃.It will not response in auto mode or dry mode.
Timer selection key:Select timer offline,timer inline or no timer.
Timer time setting keys:Set 1-16 hours.
Swing key:Select swing on or off.
Sleep key:Will shut off in 8 hours.
Too cold/Too warm keys:Only effective in auto mode.Be able to adjust the setting temperature 1℃ up/down from 25℃ when depressing once the key.
ON/OFF Key:Control on or off.
1.Avoid strong light before IR receiver
2.The common pins of swing scocket are 12V output.
The common pin of step motor should be inserted into one of the common pins of swing socket.If the direction of step motor is wrong,insert the common pin of step motor to other common pin of swing socket.
Attention:
Please instally by certificated technician.
Please test the system before installation.
Please avoid strong light before IR receiver.
