Vinflo-06, Vinflo-13, Vinflo-20 Level Regulator
Material
Body: polypropylene
Cable: Rubber CE
Technical data
Liquid temperature:min .0°c (32°F)
max .60 °c (140°F)
Liquid density:min. 0.95g/cm3
max. 1.10g/cm3
Degree of protection: IP68
USA import micro switch data
Interrupting capacity of micro switch:
AC, resistive load, 250V 10A
AC, inductive load, 250V 3A
With ENEC / VDE Certification
The Vinflo is a build-type lever regulator for lever regulation and control of pumps and valves.
The simplest possible method for level control! A mechanical switch in a plastic casing, freely suspended at the desired height from its own cable. When the liquid level reaches the regulator, the casing will tilt and the mechanical switch will close or break the circuit, thereby starting or stopping a pump or actuating an alarm device.
No wear, no maintenance!
In sewage pumping stations, for ground water and drainage pumping — in fact, for most level control applications — Vinflo is the ideal solution.
This level regulator is available in different versions, depending upon the medium in which it is to be used. As standard, the regulator can be obtained with 6 or 13 or 20 meters(20 or 42 or 65 feet) of cable for liquids with specific density between 0.95 and 1.10 g/cm3. The regulator can withstand up to 60 °c (140°F).
