Application:
Jet pumps are suitable for pumping clean water and fluids which are not chemically aggressive to the pump components. They are extremely reliable, economical and simple to use, being particularly suitable for domestic applications such as the automatic distribution of water from small and mudiem-sized surge tanks, watering gardens, etc. These pumps should be installed in a covered area, protected against the weather, N.B. It is always advisable to install a foot value or a non-return value on the suction opening.
Material:
Pump body: Cast iron
Motor support: Cast iron
Motor housing: Aluminum
Impeller: Brass
Diffuser: Noryl
Shaft with rotor: 45# Steel, AISI 416
Stainless steel if request
Mechanical seal: Carbon/Ceramic
Single phase 220V-240V/50Hz
Operating:
Liquid temperature up to 60 ° C
Ambient temperature up to 40 ° C
Total Suction lift up to 9 m
Continuous duty
Motor:
Two-pole induction motor (n=2850r. P. M)
Insulation Class B
Protection IP44
Jet pumps are suitable for pumping clean water and fluids which are not chemically aggressive to the pump components. They are extremely reliable, economical and simple to use, being particularly suitable for domestic applications such as the automatic distribution of water from small and mudiem-sized surge tanks, watering gardens, etc. These pumps should be installed in a covered area, protected against the weather, N.B. It is always advisable to install a foot value or a non-return value on the suction opening.
Material:
Pump body: Cast iron
Motor support: Cast iron
Motor housing: Aluminum
Impeller: Brass
Diffuser: Noryl
Shaft with rotor: 45# Steel, AISI 416
Stainless steel if request
Mechanical seal: Carbon/Ceramic
Single phase 220V-240V/50Hz
Operating:
Liquid temperature up to 60 ° C
Ambient temperature up to 40 ° C
Total Suction lift up to 9 m
Continuous duty
Motor:
Two-pole induction motor (n=2850r. P. M)
Insulation Class B
Protection IP44
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.gif)
.jpg)
