S series cone crushers are featured by high efficiency, high production ability and lower operating cost, etc.
Large Broken Pressure
S series cone crushers has longest arm of crushing force than other series cone crushers,this gives it bigger broken pressure forced to the cavity.The force conducted by eccentric to the main shaft is much lower,and this allows the lower temperature rise,ensuring a long life.
High Efficiency
The cavity is designed with good technology, it could perfectly cooperate with the fast gyrating of head,and this could give S series cone crushers huge impact and pressure casued by the head,and with high efficiency.The raw materials crushed in the cavity could be continued crushed while discharging products at the same time with gravity.
Raw materials will be rearranged after 3 to 5 times cruching activities,and during the falling and bumping,better shapes of final products will be finished.
High Yield
S series has the biggest gyrating stroke compared with other types cone crushers,and this will make a higher ouput,because it has the good ability to process the crushing materials effectively with more crushing materials in each gyrating stroke.
In every gyrating stroke, the distance the head moving opposite to bowl liner is big enough to let into more crushing materials to enter cavity, forming a larger volume of crushing material, so that the crushing materials passing speed is much higher;
Both standard head cone crusher and short head cone crusher can fully reach the capability of crushers by giving full feed in cavity.
Low Daily Operation and Maintenance Cost
Proper choice of structural design and materials could make the life of the equipment longer;
Longer arm of crushing force decreases the burden of sliding bearing, gears and main frame;
The size of final products is even, reducing the burden of circulation;
High reliability of anti-iron system and it attributes a lot in reducing burden.
The cleaning system of hydraulic pressure is easy to control, saving the maintenance time.
The major difference between standard head and short head is the cavity.
Standard Head---Allowing larger feeding size and it enables the customers to conduct first time or twice crushing process according to practical situation. Each type of standard head cone crushers includes 4 different cavities, thus fine, media, coarse and extra coarse.
Short Head---With a relatively deep head, has longer the parallel space of cavity, if the feed size is small, then the finer final products could be produced. It can be conducted as the second or third time crushing process. The same to standard head, each type of short head cone crushers includes 4 different cavities ,thus fine, media, coarse and extra coarse.
Crushing Cavity Selectionof S Series Cone Crushers
Type of cavity | Standard (B) | Short head (D) | |||
Minimum discharge setting (Closed side) | Maximum feed size | Minimum discharge setting (Closed side) | Maximum feed size | ||
S240 | Fine medium coarse Extra coarse | 15mm 22mm 25mm 38mm | 180mm 205mm 230mm 315mm | 5mm 6mm 10mm 13mm | 60mm 76mm 115mm 115mm |
Remarks:The minimum discharge opening refers to the discharge opening when the supporting sleeve jumps under the rated spring pressure. It differs with different type of rock
S Series Cone Crushers, capacities (t/h)
Specification | Closed side discharge setting (mm)and corresponding capacity | ||||||||||
5 | 6.3 | 10 | 12.5 | 16 | 19 | 25 | 32 | 38 | 50 | 64 | |
S240B | 181 | 204 | 260 | 340 | 380 | 420 | -- | ||||
S240D | 90 | 136 | 163 | 210 | 255 | 290 | 335 | -- | -- | -- | -- |
