Rexroth S10A, G1/2 threaded connection hydraulic check valve is also known as non-return valve which means for preventing reverse flow of oil flow in the hydraulic system, or used to prevent the compressed air in the pneumatic system reverse flow.
Rexroth S10A, G1/2 Threaded Connection Hydraulic Check Valve
Installation location for inline hydraulic one direction check valve:
The installation location of threaded connection check valve is unrestricted, usually installed in a horizontal pipeline with threaded, but it is also be installed in the vertical pipe or inclined pipeline.
Rexroth S10A, G1/2 Threaded Connection Hydraulic Check Valve
Installation location for inline hydraulic one direction check valve:
The installation location of threaded connection check valve is unrestricted, usually installed in a horizontal pipeline with threaded, but it is also be installed in the vertical pipe or inclined pipeline.
The Rexroth S10A, G1/2 threaded connection hydraulic check valve installation precautions:
1. Install a check valve, it should pay special attention to the medium flow direction, so that the medium remains consistent with the direction of the arrow direction on the valve body indicated, otherwise truncated normal flow of hydraulic oil. The end of the valve should be installed in the bottom of the hydraulic pump suction piping lines.
2. There is a pipeline water hammer pressure when check valve closes, it will cause severe damage to the other valves, piping or equipment, especially for the big size lines or high-pressure pipeline, it should attract the attention of the check valve selection.
3. The check valve is used for preventing the reflux fluid medium in the various types of piping or equipment on a one-way check valve only.
1. Install a check valve, it should pay special attention to the medium flow direction, so that the medium remains consistent with the direction of the arrow direction on the valve body indicated, otherwise truncated normal flow of hydraulic oil. The end of the valve should be installed in the bottom of the hydraulic pump suction piping lines.
2. There is a pipeline water hammer pressure when check valve closes, it will cause severe damage to the other valves, piping or equipment, especially for the big size lines or high-pressure pipeline, it should attract the attention of the check valve selection.
3. The check valve is used for preventing the reflux fluid medium in the various types of piping or equipment on a one-way check valve only.
Rexroth S8A, G3/8 Screw-in Connection Check Valve Performance Curve:
