Vicky Zhang
Email:vicky(at)htpipe(dot)com
MSN:htpipe2009(at)hotmail(dot)com
Skype:htpipe2009
Yahoo:zhqiuli001
Googletalk:zhqiuli001(at)gmail(dot)com
Email:vicky(at)htpipe(dot)com
MSN:htpipe2009(at)hotmail(dot)com
Skype:htpipe2009
Yahoo:zhqiuli001
Googletalk:zhqiuli001(at)gmail(dot)com
Monel K-500 Chemical composition:
Alloy | % | Ni | Cu | Al | Ti | Fe | Mn | S | C | Si |
Monle K500 | Min. | 63 | 27.0 | 2.30 | 0.35 | |||||
Max. | 33.0 | 3.15 | 0.85 | 2.0 | 1.5 | 0.01 | 0.25 | 0.5 |
Monel K-500 Physical properties :
Density | 8.44 g/cm3 |
Melting point | 1315-1350°C |
Monel K-500 minimum mechanical properties in the room temperature:
Status | Tensile strength Rm N/mm2 | Yield strength RP0.2N/mm2 | Elongation A5 % |
Monel K500 | 1100 | 790 | 20 |
Alloy K-500 has approximately twice the tensile strength and triple the yield strength of Alloy 400. The strength of Alloy K-500 is maintained to 1200 degrees Fahrenheit, but stays ductile and tough down to temperatures of -400 degrees Fahrenheit. Alloy K-500 also stays non-magnetic to -200 degrees Fahrenheit.
Additional characteristics of Alloy K-500 include outstanding corrosion resistance in a wide range of chemical and marine surroundings, from salts and alkalis, non-oxidizing acids to pure water. Alloy K-500 is non-magnetic and spark resistant. It is also recommended that Alloy K-500 be annealed when it is welded and that any weldments be stress relieved prior to aging.
Industries Served:
gas & oil extraction
chemical processing
marine engineering
