Ring Joint / Metal Ring gasket / RTJ Gasket
Ring Shape: oval, Octagonal, Delta, Lens
Materials: soft iron, carbon steel, 304SS, 316SS, F5, F12 and more
Oval / Octagonal Ring Joint Gasket, Custom Seals And Gaskets
Description:
Ring Joint / Metal Ring gasket / RTJ Gasket are machined from solid metal in a variety of shapes and designed for high pressure, high temperature or highly corrosive applications by selecting the most suitable material and shape. It is designed to
withstand exceptionally high assembly loads over a small area, thus producing high seating stresses.
Applications:
Ring joint gasket is primarily used in the oil, gas and petrochemical industries to seal flanged connections subject to gas pipe flange, pressure vessel, high speed joint face, valve with high temperature and high pressure place.
Specifications:
- Fully comply with the ASME B16.20 standard and the API spec 6A requirements (where applicable)
- All gaskets complying to API standard 6A are marked with API monogram license no as per API-6A (PSL4)
- Meet the rigid quality requirements for ring joint gaskets set by the American Petroleum Institute (API)
- Shape: oval, Octagonal,Delta,Lens
- Standards: Standard style R ring type joints are manufactured in accordance with both API 6A and ASME B16.20 size and ratings
- Available in both oval and octagonal configurations, both types are interchangeable on the modern octagonal type grooved flanges
- As with all metal ring type joints including style R, it is recommended to replace the ring when flange connection is broken
- Sizes: R, RX, BX
- Pressure: 150lbs to 5,000lbs
- Materials: soft iron, carbon steel, 304SS, 316SS, F5, F12 and more
-
ring joint gasket tolerances (inches):
- "A" width of ring: ±0.008
- "B" "H" height of ring: ±0.020
- "P" average pitch diameter of ring: ±0.007
- "23°" angle: ±1/2°
Style:
Model No. |
Style |
Section |
SL-G1252OV |
Oval Ring |
|
SL-G1252OT |
Octagonal Ring |
|
SL-G1252RX |
High-pressure Rx Ring with a pressure passage hole |
|
SL-G1252BX |
High-Pressure BX Ring With a pressure passage hole |
|
SL-G1252DT |
Delta Ring |
|
SL-G1252LN |
Lens Ring |
|
Material Choice
Material |
|