Performance
Max pull | 90kN |
Speed at max pull | 2.4km/h |
Max speed | 5km/h |
Pull at max speed | 44kN |
Note:the basic machineperformance is calculated at 20°C and at sea level |
Characteristics
Bull-wheel diameter | 520mm |
Max rope diameter | 20mm |
Mass | 4300kg |
Dimensions | 3500x2100x2500 |
Engine
Diesel | 123Kw/2500 rpm |
Cooling system | Water |
Electrical system | 12V |
Main Configuration
Engine | Cummins(Joint ventureor USA)watercooled |
Main variable pump | |
Main Motor | |
Reducer | RR(Italian) |
Main Hydraulic valve | Rexroth(BOSCH) |
Radiator | AKG |
Hydraulic instrument | WIKA |
Hydraulic Transmission
Closed hydraulic circuit for stepless speed variation in both rotating directions.
This machine is provided with a pull pre-setting system that maintains the pre-set pulling value(also when the speed is reduced to "0")by automatically adjusting the operation speed according to the friction and unexpected loads which may occur.
Configuration
Negative self-acting hydraulic brake
Hydraulic dynamometer with set-point and automatic control of maximum pull.
Hydraulic oil cooling system
Control instruments for hydraulic system and diesel engine.
Rigid axle for towing at max speed of 30km/h.
On board reel winder with automatic level wind,suitable for standard reels.
Pull pre-setting system
Mechanical front stabilizer
Grounding connection point.
The working site
FAULS AND TROUBLE SHOOTING OF HYDRAULIC CIRCUIT
Faults | Cause | Trouble shooting |
Diesel engine can't start | 1. battery no current 2.temperature too low 3.diesel fault | 1.charge or replace 2. Spray startupliquid or heat up cooling water. 3. check per usinginstruction |
No pull or didn't Reach rating value | 1. Variable pump, pulladjust oil relieve valve fault,or adjust isn't ok. 2. pressure adjustinvalid or isn't ok | 1. clean or readjust 2. readjust or replace |
Bullwheel can't back run | 1. Variable pump, payout adjust oil relieve valvefault or adjust isn't ok. 2. brake closed | 1.check or readjust 2. open brake |
Brake can't open | 1.boost pressure toolow 2.brake damaged | 1.adjust boost oilrelieve valve (in variable pump ) 2. replace brake |
Return filter pointerin red area. | Return filter clogging | Replace filter element |
The working site
Shipment
1. The machines will be shipped in container
2. We will ship the products within one month normally after receiving the payment.
3. Stock is available for standard product.
Payment
1. We accept T/T and L/C.
2. Please send swift copy of T/T if you arrange payment by T/T
3. Please send us the L/C draft to us before issue L/C.
Why choose us:
1. High quality and competitive price
2. Leading and biggest manufacture for stringing equipment in China.
3. 25 years of production experience and more than 1000 customers in the country and abroad market. The machines have been sold to more than 20 countries.
4. Big stock condition for fast shipment.
5. Detailed pre-sales service and fast active after-sales service. Response within 12 hours after-sales service