800D Series Features and Specifications:
0-100 Digital Adjustable KV
Fully Adjustable Amperage
With three setting program,for flat shape workpiece,complicated shape workpiece,recoating,easy for operation.
Fully Adjustable Air for Pump on Pressure, Dosage and Nozzle Rinsing Air.
Comes with Full Array of Nozzle Assortment.
Field Tested and Proven to operate in the toughest environments.
Comes with different array of delivery systems:
Hope Feed - 2L (other size hopper also could availbale)
Fully Adjustable Amperage
With three setting program,for flat shape workpiece,complicated shape workpiece,recoating,easy for operation.
Fully Adjustable Air for Pump on Pressure, Dosage and Nozzle Rinsing Air.
Comes with Full Array of Nozzle Assortment.
Field Tested and Proven to operate in the toughest environments.
Comes with different array of delivery systems:
Hope Feed - 2L (other size hopper also could availbale)
Electrical data | |
Mains input voltage | 100-240 VAC |
Operating frequency | 50-60 Hz |
Input power | 50W |
Nominal output voltage (to the gun) | max. 12 V |
Nominal output current (to the gun) | max. 1 A |
IP54 | |
Ambient temperature range | 0°C - +40°C (+32°F - +104°F) |
Max. operating temperature | 85°C (+185°F) |
Approvals | CE |
Pneumatical data | |
Compressed air connection | 1/4" male quick release |
Max. input pressure | 10 bar / 145 psi |
Min. input pressure (while unit in operation) | 6 bar / 87 psi |
Max. water vapor content of the compressed | air 1.3 g/m³ |
Max. oil vapor content of the compressed air | 0.1 mg/m³ |
COLO-800DT-Bis the perfect solution for laboratory powder coating applications.Designed for small sample testing or powder manufacturers, the Lab Unitfeatures a 1L fluidizing powder hopper and is easily cleaned betweencolor changes.
The principle of powdercoating:
There is a high voltage electric corona discharge field between spray gun and artifacts, when the powder particles spit out from the powder gun mouth through discharge zone, complementary and set a large number of electronic, become negatively charged particles under the action of electrostatic attraction, adsorb to the positively charged the workpiece.
TROUBLES
TROUBLES
Problem | Cause | Measure |
High –voltage display does not operated even after powder is on and trigger is pulled | . Electric faulty-The electric line coming into CONTROL UNIT is not property connected . Faulty fuse and bad equipemnt on the part of external power source . .Faulty lamp. .Faulty printed circuit board(PCB) .Faulty line in GUN .Faulty in high-voltage generation part .Faulty trigger switch | . connect the power Replace Preplace Preplace Preplace Preplace Preplace Preplace |
The powder would not be fluidized | .The fluidzing air hose is not connected or compressed air is not input . Faulty fluidizing plate . Faulty operation of pressure reduction valve | .Connect after checking .Replace .Replace |
The gauge hands of CONVERYING AIR and DOSING AIR do not move during operation | .operation mistake: The power switch is not pressed .The trigger is not pulled .Faulty SOLENOID valve .Faulty PCB | . Turn on the power switch .Check while pulling the trigger . Replace |
Problem | Cause | Measure |
The powder would not be ejected even after power switch is on and trigger is pulled | .Blolckage generated in injector , check valve sleeve in the injector paint hose or GUN . worn-down sleeve .Poor fluildfying operation .CONVERYING AIR is not supplied. . Faulty air –adjustment valve . Faulty solenoud valve . Faulty PCB . Oil and moisture contained In the compressed air | . Disassemboe and clean . Replace .Replace .check above issues .Replace .Replace .Replace .Install an air dehydrator |
Manual coating equipment Function description
the powder gun through the powder hose . The powder is electrostatically
charged at the nozzle of the gun. In addition, an electrostatic field is
created between the gun nozzle and the grounded object. The charged
powder spray remains adhered to the surface of the object.
The powder is fluidized by air forced through a porous plastic plate from
below. The powder acquires, thereby, fluid-like characteristics.
The conveying air, supplementary air, and rinsing air are set on the control
Unit
Include
A control unit power supply cable
- A air filter
- A air pressure regulator
- A fluidized powder hopper
- A plug-in injector
- An manual powder gun with gun cable, powder
hose, rinsing air hose and standard nozzle set.
- Pneumatic hoses for conveying air (red), supplementary
air (black) and fluidizing air (black)
powder hose
Ground wire
Electrical data
Mains input voltage: 220V/110V
Operating frequency: 50Hz /60Hz
Powder: 50W
Output voltage (to the gun): 0-100KV ( adjustable)
Maximum output current (to the gun): 180UA(max)
Protection type: IP54
Approvals: CE Certification
Pneumatical data
Input pressure: Min. 6 bar(87PSI)/max. 10 bar(145PSI)
Recommended input pressure: 7 bar(101.5PSI)
Max. Water vapor content of the compressed
Air 1.3 G/m 3;
Max. Oil vapor content of the compressed air 0.1 mg/m3;
Packing Dimensions
Length: 44cm
Width: 44cm
Height: 56cm
Weight: 12 kgs.