2, Engine Make & Model:Perkins 4012-46TAG3A
3,Alternator Model : LL9124H
3, Circuit Breaker Type:3 Pole MCCB
4, Frequency:50 Hz
5,Cycle: 4 Stroke
6, Engine Speed:1500 rpm
7, Cooling Method: Water
8, Governing Type: Electronic
9, Output Type: AC Three Phase
10,Base Frame Type:Heavy Duty Fabricated Steel
Water Cooled Diesel Caterpillar Diesel Generator , 24 VDC
FEATURES
GENERATOR SET
Complete system designed and built at ISO 9001
certified facility
Factory tested to design specifications at full
load conditions
Fully engineered with a range of options and
accessories
ENGINE
Industrial water cooled diesel engine
Isochronous electronic speed control
Governor, electronic
Electrical systems, 24 VDC
Cartridge type fuel and oil filters
Air filter
Lube oil drain valve
Battery(ies), rack and cables
GENERATOR
Self excited brushless generator
Insulation system, class H
Drip proof generator air intake (IP23)
Electrical design in accordance with BS5000
Part 99, IEC60034-1, VDE0530, UTE5110
CONTROL SYSTEM
PowerWizard 1.0 control panel
Vibration isolated sheet steel enclosure with
hinged lockable door
MOUNTING ARRANGEMENT
Heavy-duty fabricated steel base with lifting points
Anti-vibration pads to ensure vibration isolation
Generator coupled to engine by flexible
disc-coupling
Baseframe incorporates heavy-duty fabricated
steel fuel tank, 8 hours running capacity
EXHAUST SYSTEM
Heavy duty industrial capacity exhaust silencer
(approximately 10 dBA reduction) supplied loose
COOLING SYSTEM
Standard ambient temperature
Fan, fan drive and charging alternator fully
guarded
Coolant drain valve
Antifreeze protection coolant
CIRCUIT BREAKER
3-pole molded case circuit breaker (MCCB)
Vibration isolated sheet steel enclosure with
removable cover plate
Outgoing cable stub-up area directly below
circuit breaker
AUTOMATIC VOLTAGE REGULATOR
Voltage regulation ±0.5%
Provides fast recovery from transient load changes
EQUIPMENT FINISH
All electroplated hardware
Anticorrosive paint protection
High gloss polyurethane paint for durability
and scuff-resistance
QUALITY STANDARDS
BS4999, BS5000, BS5514, IEC60034, VDE0530
DOCUMENTATION
Operation and maintenance manuals provided
Wiring diagrams included
WARRANTY
All equipment carries full manufacturer’s
warranty
SPECIFICATIONS
ENGINE
Manufacturer .....................................................................Perkins
Model.....................................................................4012-46TAG3A
Type...................................................................................4 Stroke
Aspiration ....................Turbocharged Air-to-Air Charge Cooled
Cylinder configuration........................................................12/Vee
Displacement — L (cu in) .......................................45.8 (2,794.9)
Bore/Stroke — mm (in) .............................160.0 (6.3)/190.0 (7.5)
Compression ratio ...............................................................13.0:1
Engine speed (rpm) ..............................................................1,500
Maximum power at rated rpm — kW (hp)
50 Hz Standby..................................................1643.0 (2,203.0)
BMEP — kPa (psi)
50 Hz Standby.....................................................2868.0 (415.9)
Regenerative power
