This product adopts 3-phase brushless generator for power generation to charge its inside 40mAh/3.6V chargeable lithium battery. The power stored is transformed to the LEDs for lighting. With a Torch Switch to control the model: 1LED-3LED-flashing-Off.
Features:
1.Cranking for power, low noise but high efficiency.
2.Absorb solar energy for power, green and environment protection.
3.3pcs Ultra bright lighting.
4.Newfangled design which can charge the light by cranking, energy saving
and no pollution. Need no batteries.
5.Newfangled design which can be used in the bicycle and also hand LED torch.
1) Main Technical Parameters:
The Max. Luminous flux | ≥12 Lm |
The Max. beam luminous intensity | ≥ 50000mcd |
Lighting time after 1 minute cranking | ≥15 Minutes |
Lighting time after 30mins chargingby light energy | ≥10 Minutes |
Lighting time after full charged | ≥2hours |
Lighting distance(Center pointluminous intensity 0.2lux) | ≥10m |
Charging/discharging circle | ≥500 times |
The Max.power output of the brushlessgenerator | ≥1.5w |
LED lifetime | ≥100000 Hours |
Main body material | ABS |
2) Main parts life-span:
Switch | ≥10000 Times |
The whole unit | ≥5 Years |
The plastic part | ≥5 Years |
3) Size and Weight:
Product size | 86x44.3x36mm |
Product weight | 80.2g |
4) Others:
Specification of built-in battery | Chargeable lithium battery Lir2032 :3.6V40mAh |
Solar Panel: | 5.4v,5mAh amorphoussilicon cell panel |
Charging operation:
1.Crank to charge its inside battery: hold the unit and crank the handle by the other hand at the speed of 3 circles per second to charge its inside battery.
2.Put the flashlight in the sunlight, it will be charged automaticly.
Picture of Solar dynamo self-powered hand wind up flashlight
Pictures of LED dynamo solar bike light when fix a bicycle holder spare parts:
Picture of Solar dynamo self-powered hand wind up flashlight
Pictures of LED dynamo solar bike light when fix a bicycle holder spare parts: