fully automatic blow molding mchine
1)It is suitable for producing PP,PE,HDPE,PVC and various kinds of plastic bottles and containers in all shapes.
2)It is widely used to produce kinds of watering bucket,chemical barrels,foodstaf barrels and related product.
3)This type of machine is improved on the basis of the previous machine.The improved design has much space to place the mold,so leaving more place for you to inset various mold.It helps you to save the investment cost on machine.
4)The machine use mechincal-double-arm clamping system which ensures the mold being tightly closed even under great pressure and high temperature.
5)Mold open-and-close speed is increased.
6)Easy to operate and maintenance
7)High quality and low price.Machine cost can be regained with 1-2 years.
For more information about the machine,please don't hesitate to contact us.
1)It is suitable for producing PP,PE,HDPE,PVC and various kinds of plastic bottles and containers in all shapes.
2)It is widely used to produce kinds of watering bucket,chemical barrels,foodstaf barrels and related product.
3)This type of machine is improved on the basis of the previous machine.The improved design has much space to place the mold,so leaving more place for you to inset various mold.It helps you to save the investment cost on machine.
4)The machine use mechincal-double-arm clamping system which ensures the mold being tightly closed even under great pressure and high temperature.
5)Mold open-and-close speed is increased.
6)Easy to operate and maintenance
7)High quality and low price.Machine cost can be regained with 1-2 years.
For more information about the machine,please don't hesitate to contact us.
Full-auto PE blow molding machine 8L-20L Double station auto blow molding machine | |||
Max. Product Volume | 20liters | Dry cycle | 500x2pc/h |
Screw diameter | 90mm | Screw L/D ratio | 24:1 |
Screw driving power | 37-45Kw | Output of HDPE | 8Kw |
No.of heating zone | 4zones | screw heating | 128kg/h |
oil pump drivingpower | 11Kw | Clamping force | 108KN |
Max. size of mold | 530x550mm | mold stroke | 240-660mm |
Max Die diameter | 180mm | Blow pressure | 0.6mpa |
Air volume | 0.9m/m/n | blow pressure | 0.3mpa |
water consumption | 90L/MIN | ||
