17 1/2" Integral blade stabilizer string stabilizer
Integral blade stabilizer near bit stabilizer API 7-1
1. Size: 6"--36"
2..Material: AISI 4145H,4145 MOD,AISI 4340,AISI 4140-4142, Non-mag material
API 7-1 near bit stabilizer and string stabilizer
Delivery Condition of semi-finished stabilizer or reamer forgings:
Heat treated by water quenching and tempering,rough machined to drawing dimensions, UT-Tested according to ASTM A-388
Mechanical property: Requirement:
Tensile Strength 140.000PSI Min
Yield Strength 110.000PSI (0.2% offset)Min
Elongation 13% Min
Reduction of Area 45% Min
CHARPY-V-N 40
Hardfacing for Stabilizer:
HF1000 Crushed tungsten carbide held in a nickel bronze matrix. The 3mm grain size ensures greater concentration of carbide which is ideal for soft formation drilling.
HF2000 Trapezoidal tungsten carbide inserts held in a sintered carbide nickel bronze matrix. This will give a greater depth of carbide coverage -- ideal for high deviation drilling in abrasive formations.
HF3000 Tungsten carbide inserts set in a power spray deposit ideal for abrasive formation. 97% bonding guaranteed, certified by ultrasonic report. Recommended for non-magnetic stabilizers.
TCI Tungsten carbide inserts (button type). The inserts have been developed to allow cold insertion and maintain close fit. A greater concentration of inserts on the bottom third of the blade and leading edge will increase surface contact to reduce wear in highly abrasive formations.
integral blade stabilizer, specifications:
HOLE SIZE | BODY OD. | FISHING | BLADE | BLADE | TONG | BORE | OAL |
8 | 43/4 | 30 | 15 | 3 | 25 | 21/4 | 72 |
81/2 | 61/2 | 30 | 18 | 3 | 27 | 213/16 | 78 |
121/4 | 8 | 30 | 18 | 31/2 | 28 | 213/16 | 83 |
121/4 | 91/2 | 30 | 18 | 31/2 | 28 | 3 | 83 |
143/4 | 8 | 30 | 18 | 31/2 | 30 | 213/16 | 90 |
143/4 | 91/2 | 30 | 18 | 31/2 | 30 | 3 | 90 |
16 | 91/2 | 30 | 18 | 31/2 | 30 | 3 | 92 |
171/2 | 8 | 30 | 20 | 31/2 | 30 | 213/16 | 94 |
171/2 | 91/2 | 30 | 20 | 31/2 | 30 | 3 | 94 |
20-26 | 91/2-11 | 30 | 22 | 4 | 30 | 3 | 110 |
| 1 | 26"x9-1/2"x3"x110" OAL,with HF3000 hard facing ,3RH integral spiral Blade,7-5/8" REG BOX x7-5/8" REG PIN |
| 2 | 23-1/2"x9-1/2"x3"x110"OAL with HF 3000 HARD FACING STABILIZER , INTEGRAL SPIRAL BLADE ,7-5/8" REG BOX X 7-5/8" REG PIN |
| 3 | 17-1/2"x9-1/2"x3"x110"OAL with HF 3000 HARD FACING,3RH INTEGRAL SPIRAL BLADE ,7-5/8" REG BOX x 7-5/8" REG PIN |
| 4 | 17-3/8"x9-1/2"x3"x110"OAL with HF 3000 HARD FACING,3RH INTEGRAL SPIRAL BLADE ,7-5/8" REG BOX x 7-5/8" REG PIN |
| 5 | 16x9-1/2"x3"x110"OAL with HF 3000 HARD FACING,3RH INTEGRAL SPIRAL BLADE ,7-5/8" REG BOX x 7-5/8" REG PIN |
| 6 | 15-7/8"x9-1/2"x3"x110"OAL with HF 3000 HARD FACING,3RH INTEGRAL SPIRAL BLADE ,7-5/8" REG BOX x 7-5/8" REG PIN |
| 7 | 15-1/2"x9-1/2"x3"x110" OAL,with Hf3000 hard facing ,3RH integral spiral Blade,7-5/8" REG BOX x7-5/8" REG PIN |
| 8 | 15"x9-1/2"x3"x110" OAL,with Hf3000 hard facing ,3RH integral spiral Blade,7-5/8" REG BOX x 7-5/8" REG PIN |
| 9 | 14-3/4"x9-1/2"x3"x110"OAL,with Hf3000 hard facing ,3RH integral spiral Blade,7-5/8" REG BOX x 7-5/8" REG PIN |
| 10 | 12-1/4"x8-1/4"x2-13/16" x 110OAL,with Hf3000 hard facing ,3RH integral spiral Blade,6-5/8" REG BOX x 6-5/8" REG PIN |
Testing equipment
ZZ TOP OIL TOOLS is the professional manufacturer for the drill stem testing tools and surface testing equipment. All the DST tools are conformed with NACE MR 0175 with traceability,and the DST tools can be worked in H2S & CO2 above 175 F and full H2S, also with the skilled and experienced engineers, we can design the drill stem testing tools as per customer's well condition. Moreover, we supply the training in our factory and operation instruction at the well site. The DST tools are exported to USA, Colombia, India, Pakistan, Iran, Brazil etc. and enjoy the good reputation from the customers.
As the manufacturer, we produce below items:
-DST tools- Full bore retrievable packer, circulating valve, select tester valve,safety valve etc.
-Surface well testing equipment - Flowhead, SSV, ESD,Separator etc.
-Wellhead equipment such as BOP, X-mas tree, Choke manifold, kill manifold, drilling spool, casing head and other valve & flanges
-Downhole tools such as stabilizer, stabilizer forging, reamer, X-over sub and etc
As the distributor, we are working with large rig companies and heavy equipment manufacturers for the below products:
-Rig parts from RG,BOMCO,SJ,Hong Hua,KR etc,such as mud pump,rotary table, hook & block, swivel, crown block and consumable parts
- BOP and wellhead parts from Rongsheng,Shenkai
- Pipe- Tubing, Casing, seamless pipe
- Handling tools and Fishing tools
Should any items be of interest to you, contact me freely.
17 1/2" Integral blade stabilizer string stabilizer
Integral blade stabilizer near bit stabilizer API 7-1
