Conventional DC powered water leakage alarm
Model No: WNC-900-V
WNC-900-V is designed to detect water or any electrically conductive fluid. The Water alarm will wire directly to any Alarm Panel without any special processors. Just connect the Water alarm to an input loop as you would a standard Open Circuit Switch. When rising conductive liquid reaches the probes the Water alarm will activate, shorting the Loop. With only 1 microampere standby current. the Water alarm WNC-900-V will also work with conventonal control panel Systems.
Features:
1)Advanced electronic technology
2)Easy installation and maintenance.
3)LED indicator for work status.
4)Fully supervised for low battery.
5)Temporal Horn with 85dB/3m in alarm mode.
6)12-24Volt DC power
Specification:
Model | Voltage (DC) | Standby Current | Alarm Current | Buzzer Output | Interconnection | Remote LED | Relay Output | Auto- Reset | Certificated |
WNC-900-V | 10.8 ~ 33V | 40A | 15mA | 85dB/3m | — | — | — | √ | CE |
Temperature & Humidity Range: | 0℃ to +55℃; 0% to 95% RH Non condensing | ||||||||
Dimensions | 100x62x40mm | ||||||||
Weights | 70g without battery | ||||||||
Battery Life | 18 Months(Carbon Zinc); 10 Years(Lithium) |