Safety Alarm Light flare

LED warning light, signal light, rotary vehicle light, safety alarm light, 9 in 1 LED light Mainly used on police, government, fire department and so on.

FOR NON RECHARGE SERIES ( it has 4 colors :red , yellow , blue , white and it includes only 1 pc safety light) :  

Using high-capacity CR123A Lithium battery as power, built-in IC chip control LED flash, this light has 9 user-selectable flash patterns:

ROTATE, double blink, single blink, alternative, SOS (Morse code) for rescue,, solid-on (low), solid-on (high),2LED flashlight and 4LED flashlight.
Easy to use!

Press the button located on the face of the light, directly above metal circle, to cycle through its nine flash/lighting functions.  

Pressing the button in 3 seconds, the light is off, and press again, the light patterns is still on that pattern.

Introduction:

1. Warning Signal Visible up to Half a Mile
2. Compact and highly visible can replace bulky triangle fixtures
3. Contains a strong magnet for placement on vehicle, will not damage vehicle
4. Finish. Can also be placed safely on the ground or roadway
5. Casing is constructed of super high strength plastic with a flexible TPR plastic Shield. Unit is strong enough to withstand being driven over by a truck. Completely Waterproof, it will even float
6. Standard red LED is perfect for clear weather. In foggy conditions our yellow and blue LED's provide superior visibility
7. Keep in your vehicle at all times, battery can be stored up to 10 years.

* Product size: Dia. 10. 8cm, high 3. 5cm

* Product weight: less than 200g( with battery)

* LED: 16pcs

Material: TPE

Packing:

-- Double blister

-- White box

-- As customer custom.

Flash patterns and running time:

ROTATE, double blink, single blink, alternative, SOS (Morse code) for rescue, solid-on (low),solid-on (high) , 2LED flashlight and 4LED flashlight.

Battery performance can vary from factors such as temperatures, age of the battery, etc.

FOR RECHARGE SERIES( it has 4 colors : red, yellow, blue, white and it includes 1 pc safety light, 1pc AC/DC charger, 1pc car charger, and 1 pc charging toucher) :

The shape and the flash patterns are same as non recharge unit, difference as follow:

Flash patterns and running time:

Battery performance can vary from factors such as temperatures, age of the battery, etc.


Step of charging:

1. Connect the AC/DC charger or car charger to the charging toucher;

2. Attach the 2 pins of the charging toucher to the 2 screw caps of the safety light

(there has a + and a - marks on both of light and charging toucher, face + to + and- to –).

LI battery in recharge series capacity: 750mAH/3.7V

AC/DC charger:

input :100-240V AC, 50/60Hz;

output: 4.2V DC,600mA

CAR CHARGER:4.2VDC 0.5A

Charging time: battery can be fully charged within 2-3hours.