| generation | size | material | watt | details |
| second | diameter 2.2cm length 6.0cm | aluminum alloy | 3W/5W | native driver,5pc lens,more brighter |
| third | diameter 1.8cm length 4.5cm | heat-resistant PU | 3W/5W | external drive |
| forth | diameter 1.9cm length 3.8cm | aluminum alloy | 3W/5W | external drive |
| eighth | diameter 2.0cm length 5.0cm | heat-resistant PU | 3W/5W | native driver,5pc lens,more brighter,no need punching |
Do you want to make surprise to your family,friend,girlfriend(wife) or boyfriend(husband)?
Do you want to make your friend(car) distinctive?
Do you want to make your life fill ed with beautiful?
If you want,please choose car led welcome light,we can give you the beautiful and unique feeling.
What is car led welcome light ?
Car led welcome light is a new-type green light for the car.It is through the led light irradiate on the film,make the picture of film take on the irradiated object through the lens's refraction,the principle of car led welcome light is similar to the slide projector. Led illuminant part adopted
the progressive Constant current control technology, uniformity of luminance, light colorful,Enduring constant, non-pollution, no electric noise, and no electronic interference.
How to Install into the car?
1. This product should be installed at the bottom of the door flame and make sure the Len vertical with the ground ;
2.Pull down the inside door board first. Mark the suitable location for drilling a hole.
3.Drill the hole on the door board with our borer .
4.Inset the product from the bottom of car door ,then arrange the power cord.
5.Install the nut through the power cord upon the hole inside; Tighten the nut;
6.Connect the power cord according to the installation guide;
7.Adjust the lamp projection to the suitable place with wrench tool.
8.Reinstall the inside door board,then check the final effect.
