- Eco-friendly, Energy saving, dimmable, super bright
- Economical version, uniform colour, non-waterproof
- Ddhesive tape back makes for easy installation
- Flexible linear lighting, can be cut by unit & connected by connectors
- 240LEDs per meter, Super Bright for the ambient back lighting
Main Parameter of Double row 240LEDs light strip
| LED TYPE | Top SMD3528 Epistar LED |
| Q'TY PERMETER | 240pcs/meter - Double Line |
| POWER CONSUMPTION | Max 19.2watts per meter |
| INPUT VOLTAGE | DC24V |
| DIMENSIONS | 14 or 15mm Wide, 5m length |
| LUMEN PER LED | 6~7 LM |
| DRIVER FOR 5 METERS | 120watts 24V Power Supply Required (constant voltage) |
| IP RATING | IP20 indoor use |
| BEAM ANGLE | 120*degrees |
| VIEWING ANGLE | Adjustableby Mounting Position |
| DIMMABLE | Yes |
| LIFESPAN | >50,000Hours |
| STANDARDS | CE, RoHS, ETL |
| HOUSING | Copper PCB |
| CONNECTOR | DC connector and other various accessoires |
| OPTIONAL COLOUR | White,WarmWhite, Cool White, Red, Green, Blue, Yellow |
Photo - Dual Row SMD3528 flex LED tape light
IP68 SMD3528 double line led strip light Warm White
Dimension Drawing of 120pcs/m 3528 LED strip
Common Accessories of LED ribbon light (different sizes optional)
Safety and Maintenance Information
1. SMD LED ribbon light itself and all its components may not be mechanically stressed.
2. Don't damage or destroy conducting paths on the circuit board while installation.
3. To guarantee safety, only qualified personnel are allowed to install LED strips.
4. Make sure SMD LED tape light are mounted to correct electrical polarity.
5. Parallel connection is highly recommended for its high safety.
6. Serial connection is not recommended because unbalanced voltage drop may damage SMD LED strips.
7. Insufficient and unstable power supply may cause flexible strip damage.
8. Don't install SMD LED ribbons directly on metallic or any other conductive surfaces.
Application of 19.2W per meter double row SMD3528 ligth strip 1. SMD LED ribbon light itself and all its components may not be mechanically stressed.
2. Don't damage or destroy conducting paths on the circuit board while installation.
3. To guarantee safety, only qualified personnel are allowed to install LED strips.
4. Make sure SMD LED tape light are mounted to correct electrical polarity.
5. Parallel connection is highly recommended for its high safety.
6. Serial connection is not recommended because unbalanced voltage drop may damage SMD LED strips.
7. Insufficient and unstable power supply may cause flexible strip damage.
8. Don't install SMD LED ribbons directly on metallic or any other conductive surfaces.
~ DIY back light for creating your place warmly & lovely;
~ Architectural lights for canopy, Corridor, Window, Archway, Backlight;
~ Edge lighting for signage, Decorative lights for holiday, event, retails display, exhibition.
