Description:
Punched up to 35sheets per time
Max punching width:360mm
Pith:12.7mm
Disengagement punch pins:27
Number of punch pins:27
Max binding thickness:450sheets
Punch margin control to adjust punching depth
Full die disengaging pins for a clean punch of multiple paper sizes
Document measurement aides in the selection of the proper wire size in accordance to the document thickness.
Side margin control provides an evenly centered punch for all document sizes
It is light-weight and easy-to-use designed to provide top of the line punching and binding for your everyday needs,.
All Disengageable Dies for perfect punching of any size paper
This 2:1 Double Loop Wire Binding Machine CW360T is ideal for both office and home environments.
With an advanced ergonomical design, provides an economical option for your binding needs
It is light-weight and easy-to-use designed to provide top of the line punching and binding for your everyday needs,.
All Disengageable Dies for perfect punching of any size paper
This 2:1 Double Loop Wire Binding Machine CW360T is ideal for both office and home environments.
With an advanced ergonomical design, provides an economical option for your binding needs
Technology Data:
| MaxBind Capacity (20# paper) | 450Sheets |
| Max Punch Capacity (20# paper) | 35Sheets |
| Binding Format | Wire |
| Punching Method | Manual |
| Binding Method | Manual |
| Punching Format (Vertical/Horizontal) | Horizontal |
| Punch and Bind Capability | Yes |
| Max Punch Length | 360mm |
| Max Binding Length | 360mm |
| Number of Punch Pins | 27 |
| Disengageable Die Pins | 27 |
| Waste Compartment | Yes |
| Side Margin Control | Yes |
Products Detail:
Dcument masure:according to your files thickness to pick the right number of sheets to punch,don't exceed the maximum number of allowed
Knob of wire size: can be adjustable according to your sheet thickness and wire size
Punching &binding handle:ensure your sheets are on the same line and feed the sheet horizon ,push the binding handle
Select punch pins: disengagement punch pins made ofhard steel for a clean hole punch
Selectable paper stop: according to you files' zise, select paper positon ,keeping sheet aligning
Waste tray: large volume waste tray make you continuious work without empty punched times
After long term use if it unbalance of closing bar , we will show you to fix it with a small tool in serveral simple steps as below:
1.
2.
3.
Loosen the two screws as indicated on the diagram a and b for one circuit only .
Check the unbalance of two closing bars by ruler or by eye then adjust the screw to left or right as
Check the unbalance of two closing bars by ruler or by eye then adjust the screw to left or right as
indicated on diagram accordingly .
Then test binding to check if the adjustment is ok or not .
Then test binding to check if the adjustment is ok or not .
If not perfect ,repeat as above until the perfect balance
