440-480nm Wave Length Dental Curing Light/1600 mw/cm2 Light Intensity Led Curing Light
1-Main Features
-Round surfaces: fits comfortably in the hand;
-Compact and lightweight(160g)
-Silent operation: no fan.
2-Technical data
Adapter Input | 100-240V AC / 50/60Hz |
Output | 5VDC-2A |
Power | 8W |
Wave length | 440-480nm |
Light Intensity | 1600mw/cm2 |
LED/Lifespan | Blue 5 watt LED/ 100,000hours |
Battery type | Li-ion |
Battery Voltage | DC3.7V |
Battery Capacity | 2000mA/h |
Net weight | 0.4kg |
Gross weight | 0.6 kg |
Equipment Dimensions W x H x D | 20 x 3.5 x 3 cm |
- Can be Sterilized at 135°C.
- Constant light intensity,
- The solidification effect is not affected.
by the consumption of remaining power.
3-COMPONENTS DESCTIPTION
a. Handpiece
b. Base
c. Probe
d. Optical filter
3 Programs
Full mode
Example:10 seconds exposure at full power (Double beeps after working end)
Pulse mode
Example: 10 consecutive one second exposures at full power (Double beeps after working end)
Example: 10 consecutive one second exposures at full power (Double beeps after working end)
Ramping mode
Example: Progressive cycle lasting 10seconds (Double beeps after working end)
Example: Progressive cycle lasting 10seconds (Double beeps after working end)
4-USER INSTRUCTIONS
A. Installation
1. Insert the probe into the front of the curing handpiece, ensure the probe is pushed all the way inside the handpiece. Remove the plastic protection from the tip of the probe.
2. Insert optical filter trough the front of the curing handpiece until it is firmly in place.
B. Operation
1. Selecting program - Press the mode set button in sequence to select programs. (1) F: Fast. (2) R: Ramp. (3)P: Pulse.The LED will display the corresponding character when the program is selected.
2. Selecting timer - Press the time set button to select the curing time. The default times are 5s - 10s- 20s- 30s- 40s.
3. Start curing - Press the on/off switch button to turn on /off the curing light. During the process of curing the display will show the remaining curing time, and come with a beep sound every 10s, 2 beep sounds when curing is complete.
4. Low Power Operation- When LED display panel starts to flash. Curing light must to be charged. If it happens during the operation, Please charge it immediately after the operation. If you are unable to charge to the battery before your next curing, please connect the adapter to keep working.
5. Sleep mode- Curing light will go into sleep mode if the light is not utilized for 60s. Press any button to deactivate the sleep mode.
C. Charge Instruction
P- Indicates connection with the power adapter.
CH- Indicate the battery is charging.
FC- Indicates the battery is fully charged.
5-Packing details
1peice
Package Dimensions (WxLxH) 235*150*75 mm
Gross weight 600g
6-Payment details
T/T, L/C & west union acceptable.
7-Shipment
6-Payment details
T/T, L/C & west union acceptable.
7-Shipment
Express: 1 or 2pcs samples testing, express recommended.e.g: TNT,DHL,UPS etc. Shipping days 3-5days.
Air shipment: Between 3pcs and 5pcs, normal air shipment recommended. Shipping days 5-10days.
Sea shipment: More than 6pcs, normal sea shipment recommended. Shipping days around 30days. Air shipment: Between 3pcs and 5pcs, normal air shipment recommended. Shipping days 5-10days.
