Key Specification
Introduction:
Diameter 16mm-800mm series PVC pipe extrusion production line is mainly used in the manufacture of plastic PVC pipes with various diameters and wall thickness used in the industried such as agriculture and constructional plumbing, cable laying etc, it also named PVC Pipe Production Line, PVC Pipe making machine.
This PVC Pipe Extrusion Line is composed conical twin-screw extruder, vacuum calibration tank, haul off, cutter and stake etc. The extruder and haul off adopt imported AC frequency control device, vacuum pump and haul off motors adopt high-quality products. The haul off methods are two-claw, three -claw, four-claw, and six-claw etc. You may choose saw blade cutting type or planetary cutting type. It is additionlly attached with length counter and intensifying device. This line is of reliable performance and high production effeciency.
Our company can also manufacture special pipe production lines. Spiral silencing pipe and core foaming pipe according to your requirements.
PVC Pipe Machine process flow:
Diameter 16mm-800mm series PVC pipe extrusion production line is mainly used in the manufacture of plastic PVC pipes with various diameters and wall thickness used in the industried such as agriculture and constructional plumbing, cable laying etc, it also named PVC Pipe Production Line, PVC Pipe making machine.
This PVC Pipe Extrusion Line is composed conical twin-screw extruder, vacuum calibration tank, haul off, cutter and stake etc. The extruder and haul off adopt imported AC frequency control device, vacuum pump and haul off motors adopt high-quality products. The haul off methods are two-claw, three -claw, four-claw, and six-claw etc. You may choose saw blade cutting type or planetary cutting type. It is additionlly attached with length counter and intensifying device. This line is of reliable performance and high production effeciency.
Our company can also manufacture special pipe production lines. Spiral silencing pipe and core foaming pipe according to your requirements.
PVC Pipe Machine process flow:
Feeder → Mixer → Feeder → Extruder → Mould → Vacuum tank → Haul-off → Printer → Cutting → Stacker
Equipment list
Equipment list
No | Name | Qua |
1 | SJSZ-80/156 Conical twin screws extruder | 1 Set |
2 | extruding head & die moulds | 1 Set |
3 | ZDLX-315x6000 Vacuum Calibration Tank | 1 set |
4 | PLX-315X6000 Spray Cooling Tank | 1 Set |
5 | Ink Jet printer | 1 Set |
6 | SLQ-315 Four-Claws Haul-off system | 1 Set |
7 | XQG-315 Planet Cutter | 2 Set |
8 | TX-315X6000 Unloading System | 1 Set |
9 | Electrical controlling system | 1 Set |
Production condition
1 | Power supply | 3p x 4 line /380v/50hz |
2 | Material | PVC |
3 | Extruder Output | 400-600kg/h |
4 | specification | Ф75-ф315mm |
5 | centre height | 1200mm |
6 | Linear speed | 3m/min |
7 | Water consumption | 15 m3/ h(water temperature≤15℃,water pressure0.20.4MPa) |
8 | Compression air requirement | 0.3 m3/min(air pressure≥0.6MPa) |
9 | dimension | 35 000×2000× 2500mm(LXWXH) |
10 | gross power | Approx356kw |
