660 Series Features and Specifications:
0-100 Digital Adjustable KV
Fully Adjustable Amperage
Pulse Power Technology for beating Faraday Cage Effect.
Able to cut Pulse Power on and off
With three setting program,for flat shape workpiece,complicated shape workpiece,recoating,easy for operation.
Fully Adjustable Air for Pump on Pressure, Dosage and Nozzle Rinsing Air.
Comes with Full Array of Nozzle Assortment.
Field Tested and Proven to operate in the toughest environments.
Comes with different array of delivery systems:
Hope Feed - 45L (samll hopper also could availbale)
Fully Adjustable Amperage
Pulse Power Technology for beating Faraday Cage Effect.
Able to cut Pulse Power on and off
With three setting program,for flat shape workpiece,complicated shape workpiece,recoating,easy for operation.
Fully Adjustable Air for Pump on Pressure, Dosage and Nozzle Rinsing Air.
Comes with Full Array of Nozzle Assortment.
Field Tested and Proven to operate in the toughest environments.
Comes with different array of delivery systems:
Hope Feed - 45L (samll hopper also could availbale)
Because this system was designed with the Pulse Power Built in its
Electronics it is specially balanced for the maximum spray capability with
the Smoothest Finish Possible.
Electronics it is specially balanced for the maximum spray capability with
the Smoothest Finish Possible.
Manual coating equipment Function description
the powder gun through the powder hose . The powder is electrostatically
charged at the nozzle of the gun. In addition, an electrostatic field is
created between the gun nozzle and the grounded object. The charged
powder spray remains adhered to the surface of the object.
The powder is fluidized by air forced through a porous plastic plate from
below. The powder acquires, thereby, fluid-like characteristics.
The conveying air, supplementary air, and rinsing air are set on the control
Unit
Include
A control unit power supply cable
- A air filter
- A air pressure regulator
- A fluidized powder hopper
- A plug-in injector
- An manual powder gun with gun cable, powder
hose, rinsing air hose and standard nozzle set.
- Pneumatic hoses for conveying air (red), supplementary
air (black) and fluidizing air (black)
powder hose
Ground wire
| Electrical data | ||
| Mains input voltage | 100-240 VAC | |
| Operating frequency | 50-60 Hz | |
| Input power | 50W | |
| Nominal output voltage (to the gun) | max. 12 V | |
| Nominal output current (to the gun) | max. 1 A | |
| IP54 | ||
| Ambient temperature range | 0°C - +40°C (+32°F - +104°F) | |
| Max. operating temperature | 85°C (+185°F) | |
| Approvals | CE | |
| Pneumatical data | ||
| Compressed air connection | 1/4" male quick release | |
| Max. input pressure | 10 bar / 145 psi | |
| Min. input pressure (while unit in operation) | 6 bar / 87 psi | |
| Max. water vapor content of the compressed | air 1.3 g/m³ | |
| Max. oil vapor content of the compressed air | 0.1 mg/m³ | |
| Packing Dimensions | ||
| Length | 120CM | |
| Width | 79CM | |
| Height | 73CM | |
| Weight | approx. 55kgs | |
| Connection Description | ||
| 1.1 Air In | Compressed air connection (6-10 bar / 87-145 PSI) | |
| 2.1 Power | Mains cable connection (100-240 VAC) | |
| 2.2 Gun | Gun cable connection | |
| 1.4 |
| |
| 1.3 | Pict
| |
| 1.2 | Pict
| |
| Grounding connection | Pict |
Electrical data
Mains input voltage: 220V/110V
Operating frequency: 50Hz /60Hz
Powder: 50W
Output voltage (to the gun): 0-100KV ( adjustable)
Maximum output current (to the gun): 180UA(max)
Protection type: IP54
Approvals: CE Certification
Pneumatical data
Input pressure: Min. 6 bar(87PSI)/max. 10 bar(145PSI)
Recommended input pressure: 7 bar(101.5PSI)
Max. Water vapor content of the compressed
Air 1.3 G/m 3;
Max. Oil vapor content of the compressed air 0.1 mg/m3;
Packing Dimensions
Length: 84cm
Width: 52cm
Height: 68 cm
Weight: 37 kgs.
Powdercoating is a type of coating that is applied as a free-flowing, drypowder. The main difference between a conventional liquid paint and apowder coating is that the powder coating does not require a solventto keep the binder and filler parts in a liquid suspension form. Thecoating is typically applied electrostatically and is then cured underheat to allow it to flow and form a "skin". The powder may be a thermoplastic or a thermoset polymer.It is usually used to create a hard finish that is tougher thanconventional paint. Powder coating is mainly used for coating of metals, such as "whiteware," aluminium extrusions, and automobile and bicycle parts. Newer technologies allow other materials, such as MDF (medium-density fibreboard), to be powder coated using different methods.
