HEPA Filter is made of ultra thin fiberglass paper and pp media separated byEVA hot-melt adhesive. Aluminum or galvanized iron frame. Small and light,well-sealed, low cost, catch 0.3um or above.
1.Efficiency: ASHRAE 65%, 85%, 95%
2.Standard: EN779 F6, F7, F8
3.Operating Conditions
4.8 0°C(Temperature:≤80°C)
5.100%RH(Humidity:≤100%RH)
Applications:
HEPA Filters are used for commercial and industrial ventilation systems withhigh air volume, high humidity, and/or high temperature requirements.
Materials Table: | |
Frame | Extruded aluminum, aluminum sheet, galvanized steelsheet, stainless steel sheet |
Media | glass Fiber |
Separator | Aluminum foil, paper |
Sealant | polyurethane |
Gasket | EVA, EPDM |
Technical Parameters:
Type | W*H*D (mm) | Area (m2) | Efficiency | Airflow (CMH) | Initial Pressure (pa) | Airflow (CMH) | Initial Pressure (pa) |
Box | 305*610*292 | 6.69 | F6 | 1000 | 75 | 1700 | 125 |
F7 | 90 | 150 | |||||
F8 | 105 | 175 | |||||
610*610*292 | 13.66 | F6 | 2000 | 75 | 3400 | 125 | |
F7 | 90 | 150 | |||||
F8 | 105 | 175 | |||||
Single header | 289*593*292 | 6.2 | F6 | 1000 | 82 | 1700 | 135 |
F7 | 100 | 165 | |||||
F8 | 115 | 195 | |||||
593*593*292 | 12.97 | F6 | 2000 | 82 | 3400 | 135 | |
F7 | 100 | 165 | |||||
F8 | 115 | 195 |