1/non-toxic, eco-friendly
2/easy to clean and install
3/waterproof, nonslip
4/Little color distortion
5/Color is bright and beautiful
6/Nice-looking packaging box to attract potential
| Item Name: | Thermal transfer film fordulcimer/wooden castanests/printing sheets for musical instrument | |||
| Usage | for dulcimer/wooden castanests/printing sheets for musical instrument | |||
| Material | EVA | |||
| Thickness | 0.02mm--0.025mm | |||
| Delivery Time | 10~15 days | |||
| Method | Heat transfer printing | |||
| Brand Name | YiXin | |||
| Material Type | Film | |||
| MOQ | 800 square meters | |||
| Maximum colors | 10 | |||
Advantages of Heat transfer printing
1\It can finish multi-color printing in one time,specially in the flat\curved\cylinder and conical surface of plastic material
2\Cut the number of production procedure,make it fast,easy and convenient.
3\With high efficiency in producing
4\Lower the producing cost
5\Without any environment pollution,meet the requirement of international non-toxic standard
6\It has high value added for the printed products ,which can bring much margin for you.
Aeon Printing Materials Co.,LTD which was established in 1999,is the first modern high-tech enterprise with professional heat transfer printing and plate making in China.We import advanced printing plate making equipments from USA and Germany,and we use domestic high-end heat transfer equipments also.After recent 10 years development,our business already covered all parts in the world,which has big influence in same industry.
Method for making heat transfer films:
First,cut some PET films from a big roll of PET films according to clients'electric carving plate size
Second,put the release layer on the PET films by the spreading machine,only after it becomes dry then can put on the heat transfer printing machine.Our 10 colors and 8 colors heat transfer printing machines with high-resolution can make the products look much more vivid.The pattern can print on the correct place with high efficiency,which can improve the products'grade and save much time.
Third,after printing the pattern,we will put the glue layer by spreading machine(use different glue according to different material,our glue can print on ABS\PP\PC\PVC\PE\EVA \wooden products\metal\glass\leather,etc)
Finally,cut into small rolls and have a series of checking by our QC department .Only after that then will deliver the goods.
Our heat transfer films can be widely used in plastic(ABS\PP\PC\PVC\PE\EVA )\wooden products\metal\glass\leather,etc,which can be applied in stationeries\commodity\wooden products(furnitures)\plastic products\stainless dinnerwares\EVA slippers\EVA floor mat,etc.
Our "YIXIN"heat transfer films use domestic thickest PET base films that can resist 300℃,making it easy to stamp on the glass and metal directly without any surface dealing.We are using the printing ink imported from Germany and we can offer professional ink report of environmental protection for your reference also,which you can use and sell the products without any worry.
Heat transfer printing is a new and special printing style with simple operation principle.It transfers the design from the heat transfer films to the surface of products when heated and pressed.However,in practical experience,need to pay attention to below a few points to improve the quality and production efficiency.
1.Stamping Temperature
Stamping temperature varies from the printing equipments\films and the products.It cannot take the higher or lower temperature as the best stamping temperature.We need to confirm the most suitable stamping temperature based on the actual printed effect.
2.Stamping Time(Speed)
Stamping Time(Speed) need to be decided by the specific products.In the condition of confirming the good printing effect,the speed is faster,the production efficiency will be higher.But some products need to stamp in slow speed because it is limited by some special conditions.
3.Stamping Pressure
Stamping pressure need to be adjusted to the most suitable one,or it will damage the pad and products if over pressured and it will influence the printing effect if stamping in less pressure.So it need to lock the pressure adjustment after confirm the best stamping pressure in case that it will make some change when printing in large quantity.
4.Keep Clean Always.
A.Keep the pad clean always,any dirt or coke does not permit sticking there.
B.Keep the workbench\roller\button and the other parts clean,it can not have some greasy dirt there.
C.Hands of operators need to keep clean,any sweat or dirt cannot get in touch the films and the products.
D.Keep the films clean always also in case it will get pollution by the greasy dirt ,fingerprints or the dirt
Heat transfer printing dulcimer
Hot stamping dulcimer
Heat transfer film for dulcimer
Hot stamping foil for dulcimer
About Aeon Printing Materials Co.,Ltd
The main gate of us
The film making room of us
