I
Specification of Tool Die Steel L6
Tool Die Steel L6 Round bar; diameter 50mm—450mm
Tool Die Steel L6 Flat bar: thickness: 20-200mm, width: 300mm—5000mm
4. Principal Design Features of Tool Die Steel L6 This is one of the Special Purpose, low alloy tool steel grades, similar to the W group of low alloy tool steels. L6 contains nickel, chromium and molybdenum for a good combination of toughness and harden ability.
5. Applications of Tool Die Steel L6 Typically used in machine tool applications such as bearings, springs, rollers or chuck parts.
6. Machinability of Tool Die Steel L6 : Machinability ofTool Die Steel L6is very good. It rates 90% of the mach inability of the W group water hardening low alloy steels rated 100% as a baseline.
7. Forming of Tool Die Steel L6:Tool Die Steel L6 may be readily formed by conventional means.
8. Welding of Tool Die Steel L6:This alloy is wieldable. Consult the supplier for proper procedures.
9. Heat Treatment of Tool Die Steel L6: Heat slowly to 1500 F and hold at temperature for 10 to 30 minutes. Oil or water quench.
10. Forging of Tool Die Steel L6: Forge at 1975 F down to 1600 F. Do not forge below 1550 F.
11. Hot Working of Tool Die Steel L6:See "Forging".
12. Cold Working of Tool Die Steel L6: L6 may be cold worked by conventional means as with the low alloy steels.
13. Annealing of Tool Die Steel L6:Anneal at 1450 F and slow cool at a maximum of 40 F per hour.
14. Agingof Tool Die Steel L6: Not applicable to this alloy.
15. Tempering Tempering is done in the range of 350 F to 1000 F for Rockwell C 62 to 45 ranges.
16. Hardening of Tool Die Steel L6:See "Heat Treatment" and "Tempering"
17. Payment for Tool Die Steel L6:We accept 30 percent advance by T/T, the balance 70 percent by T/T or L/Cwould like you to know we can provide the high quality products and competitive price.So, if you need our products, just feel free to contact with me at any time. I will reply you as soon as I get your email or telephone