Cold Runner Double Injection Mould / AL TPU Egg Beater Over
Quick Detail:
1. The part name: egg-beater (over molding injection mold)
Plastic material: AL+TPU
2. Cavity material: S136 HRC48-52
3. Mold life: 1000k scolds or according to customers quantity condition to decide it with saving cost for our customers.
4. Gate type: Cold runner to edge-gate according to our customers requires.
5. Mold base standard: LKM Local standard, DME or HASCO,Customize according to customers' requirements
6. Standard of mold accessories: LKM, DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive, INCORE, HRS, Husky, YUDO, PETS, MOLD-MASTER, MERKLE, Parker, HPS, LKM, EUCHNER, RJG, cilpres, NITTO, CRACK, ASSAB, GSW DIN standard, BOHLER, AISI standard, DAIDO JIS standard, PUNCH etc according to our customers requires.
Description:
The part name: egg-beater
Mold type: over molding injection mold
Part Material: AL+TPU
Locating ring Dimension: 3.99",
KO Pattern: 7"x7",
Sprue Radius: SR 1/2"
Ejection type: ejection pin
Mold construction description: cold runner system, insert, and 2 plates, over molding.
This part has very high appearance requirements, the defect showed below will not be acceptable, for example, weld line, Dark Sport,Sliver Marks,Gas Trap Effect,Visible Ejector Marks,Deformation,Short scold Filling,Burnt Streaks,Sink Marks,Flash,Over dimension,Under dimension,Stress Crack etc. Moreover, the product finishing surface must meet the requires more than SPI-SPE A-2.
This mould is made in Shiny Mould Factory. It is a mould exported to USA, with complicated structures and high quality requests. Customer needs mold life to be over 1 million scolds. We can ensure this mold life and give warrant to our customer that once some mould components are broken during working, if it is caused not by the operation fault from the workers, we can provide new mould components to them free of charge.
Specifications:
1.name | egg-beater (over molding injection mold) |
2.Plastic material | AL+TPU |
3.mould base material | S50C |
4.cavity material | S136 HRC48-52, H13, 420, P20, D2, 1040, 0-1, S-7, A2, 1.2344, 1.2083, 1.2311, 1.2739, 1.2343, 1.2510, 1.2767,NAK80,SKD61,718,738,DF-2 etc |
5.mold life | 1000k scolds or according to customers quantity condition to decide it with saving cost for our customers. |
6.cavity number | 2 |
7.runner | Cold runner |
8.gate type | Cold runner to edge-gate according to our customers requires. |
9.mould weight | 320 kg |
10. mould base standard | LKM Local standard, DME or HASCO,Customize according to customers' requirements |
11.cycle time | 32second |
12. standard of mold accessories | LKM, DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive, INCORE, HRS, Husky, YUDO, PETS, MOLD-MASTER, MERKLE, Parker, HPS, LKM, EUCHNER, RJG, cilpres, NITTO, CRACK, ASSAB, GSW DIN standard, BOHLER, AISI standard, DAIDO JIS standard, PUNCH etc according to our customers requires. |
13.design software | Auto CAD ,UG, Pro-E ,Solid Works,moldflow,etc. |
14. File Formats</s |
