Introduction:
MHC Track hydraulic jack series is the mechanical product for lifting.It is widely used in automobile manufacturing,machinery and transportation area.
Track hydraulic jack uses rigid jacking pieces as working device.Lifting heavy goods by the top bracket or bottom hold claw.This jack is used when normal jack hardly work.Rocker arm can be rotated 270 °.Oil return automatically when it reach the height limit.Use the handle to tighten the hydraulic valve first when start the jack.Wave the manual pump up and down,jack can be rising.If need to lay down,just loosen the hydraulic valve.This jack can not lay down automatically without gravity.The weight of the top load is twice than the bottom load,if height permit,it is better to use the top position.
Technical parameter:
Type | Toe(T) | Top(T) | Min. Height(mm) | Lifting(mm) | N.W.(kg) |
MHC-5 | 2.5 | 5 | 24 | 110 | 15 |
MHC-10 | 5 | 10 | 25 | 130 | 24 |
MHC-20 | 10 | 20 | 29 | 145 | 40 |
MHC-30 | 15 | 30 | 35 | 132 | 55 |
MHC-50 | 25 | 50 | 40 | 132 | 75 |
Illustration:
Overload use is not allowed!
Add load on the promoting load is not allowed!
Place where is unsteady or dangerous is not allowed to use this jack!
Use this jack on the steady land and the surface can afford the load.
Keep a sure amount load during lifting.
It is forbidden to use the end of the toe to lift the load.
Can not be used for lifting people.If there is man on it,it is forbidden to lift.
Broken ones,unqualified ones or senescent ones are not allowed to be used.
Unsteady load can case the jack or load slip.
Broken ones,unqualified ones or senescent ones are not allowed to be used.
Unsteady load can case the jack or load slip.
