Red Eco Friendly Swimming Pool Tile Grout Mosaic Adhesive

Trade on HiSupplier, Worry Free Guarantee
Trading safety, secure your money, lower the risk, protect both buyers and suppliers
HiSupplier is a Chinese multinational company in U.S, it helps to coordination and order landing.
More ›
  • Product Details
  • Company Profile
  • Product Reviews


Red Eco Friendly Swimming Pool Tile Grout Mosaic Adhesive



Product Description


Mosaic Adhesive:


Used for various small-sized bricks or mosaics.


1. Grout and adhesive 2 in 1.
2. Excellent workability and slump resistance.
3. Economical and easy to apply.
4. For internal and external wall and floor use.
5. Easy application on all kinds of surfaces.
6. Recommended for swimming pools and other wet location.
7. Very suitable for ceramic tiles, mosaics, quarry tiles and slip bricks.
8. High tensile and shear adhesion strength.
9. Non-toxic.


Surface Preparation:

All surfaces must be structurally sound, dry, clean and free from movement, oil, grease, Wax, curing compounds and any other loose or contaminating materials.

Stir and Mix:

1. Add clean water to a bucket, then slowly add mosaic adhesive powder to the water. Stir the mix with electrical drill-mixer until a lump-free consistency is achieved. Allow the mix to stand for 3 to 5 minutes. Re-stir then use the mosaic adhesive.
2. The mixing ratio is 20 kg powder to 5 liters of water.



1. When fixing mosaics, the surface and the back of mosaics should be steel trowelled with the straight edge of the trowel, take attention to the full grouting of joints. Press the mosaics firmly into position in wet adhesive within 15~20 minutes.
2. It is recommended to use PB-K11 series of waterproofing materials before tiling in wet areas(bathroom, shower, swimming pool, etc).
3. It is recommended to use Liquid Water Repellent on the tile or marble surface in order to prevent fadedness, slurry-out, and pollution.



1. Make sure vertical and horizontal veracity of the surface before working.
2. Dispose mosaic adhesive before hardening.
3. The floor should be opened to light foot traffic or grout after 24 hours following the process.

4. Don't apply mosaic adhesive in temperatures above 40 or below 5.
5. Don't allow the adhesive to skin. If the adhesive skins, remove and dispose of it, then re-apply fresh adhesive.




Main ingredient:


Concrete macromolecule polymer.








Shelf life is minimum 1 year when stored in covered and dry environment.



Normal Amount:


Size of notched trowel


Technical parameter


1.7 kg/

Adjusting time: 15 minutes

Hardening time: 10 minutes


3.0 kg/

Full curing time: 24 hours

Waterproof; non-toxic


4.5 kg/

Resistance to acids and alkali

Shearing strength >1.5MPA(14days)


Send message to this supplier
Mr. Joe Yuan
Tel: 86-20-87537068
Enter between 20 to 3,000 chatacters.
Contact Method
Guangzhou Pinbang Building lndustrial co.,LTD
Room A601, Yangcheng Garden, Zhongshan Avenue, Tianhe District, Guangzhou, Guangdong, China (Mainland)
Didn't find what you're looking for? Post Buying Lead or contact our customer service specialist for help!
Buyer Help Center