pecifications
1.Hoisting the molten metal
2.Mainly used for steel mills,smelting workshop
3.The motor insulation class H
Features:
Model HC Electric Wire rope Hoist is a middle-sized lifting equipment,which can be mounted on single or double beam,bridge,gantry and arm cranes. With slight modification,it can also be used as a winch.It is widely used in factories,mines,harbors,warehouses,cargo storage areas and shops,essential in raising working efficiency and improving working conditions.
Breif introduction | HC Electrical Heavy Duty Pulling Crane for Hot Sale is assembled by several parts: Hoisting Gear Box, Hoisting Motor with brake, Rope Drum, Electric Control Panel and Traveling Trolley. All these units are separately accessible and promptly disassembled cost and stopped. |
HC model | single speed for lifting, general speed can satisfy common lifting. |
HM model | double speed for lifting with double linkage motor, two lifting speed: general speed and slow speed, work with slow speed can realize precision loading and unloading, such as examine and machine repair and similar precision work. |
Gear Box | Hoist Gear Box has specially treated gears for high wear resistance. Each Geared Shaft assembly is supported on ball or roller bearings, to ensure smooth, low-friction operation. |
Wire Rope | Hoisting ropes comply with the exporting standards. The leading rope taken by the Drum does not slip sideways when slack. The factor of safety, on the nominal breaking strength of the rope is six. |
Electric apparatus controlling system | Model HC and HM hoist is composed of the contactor box, controlling switch, cut-off limiter, the working voltage of controlling switch is 380V,36V or 24V(safety voltage). |
Rope Guide | Rope Guide is in two halves, ensuring easy accessibility. It encircles the Drum completely so that the rope may not uncoil even when the Hoist is in unloaded condition. The rope guides of our company is thickened and dilated, so that it is not easy to be damaged. |
Hook | The Hook Block is tested to 150 % of full load before assembly. The rope sheaves are fully guarded with protective steel casting. All sheaves rotate on ball bearing the pulley is thicken and dilated than domestic common pulley. |
Model | HC Model Electric Hoist With Trolley |
Capacity | 16T-50T |
Consist of | 1. Windling drum 2.Electric motor 3. Brake 4. Reduction gears 5. Coupling 6. Wire rope 7. Rope-guide 8. Rotor and Stator |
Sling type | wire rope |
Speed | Single speed |
Hoisting height | 3-30m |
Hoisting speed | 4m/min |
Traveling speed | 18,20m/min |
Used on | 1. Single girder overhead crane 2. Single girder gantry crane 3. Jib crane 4. Hoist trolley |
Working duty | M3---M6 |
Control methods | Remote control |
High quality | 1. Prevent winding flange 2. Automatic line casting machine, prevent the wire rope twined. 3. The gear will be grinding by using 20MnTiB, then through heat treatment. The gear is the the top quality in China. 4. Painting car varnish, make sure beautiful appearance. |
.jpg)
