Drill stem testing tools Hydraulic Jar Bigjohn fullbore
Bigjohn fullbore hyraulic jar 5" DST tools
Brief introduction
The hydraulic jar(Bigjohn Jar) is a safety tool.
The hydraulic jar is included as part of tool string to help remove stuck tools.
The jar helps free a stuck tool or tool string by resisting a pull on the workstring, when the workstring is stretched by the pull, tension in the jar is released and an upward impact is delivered to the stuck tool.
The pulling strength of 5" Hydraulic Jar is 222.2kN.
Features and Benefits
• Design of the hydraulic system ensures long life with little maintenance.
• Rig time is reduced.
• Jar can be re-cocked rapidly.
• Jar time delay is adjustable.
• Amount of pull to trip the jar can be varied within the limits of the time-delay system.
Operation
The temporary resistance that powers the jar is provided by a hydraulic time-delay system. Resistance is released when the metering sleeve inside the jar moves into a bypass section of the outer case. This action allows the special hydraulic oil to bypass rapidly.
The time delay required to release the temporary resistance varies in relation to the weight of the pull. For example, a light pull requires more time for release than a hard pull. When tools below the jar are stuck, a steady pull applied to the jar creates an upward impact blow to the string. The jar can be re-cocked when the string is set down.
No | Specification | 5" | 3 7/8" |
1 | O.D. | 127.5mm | 99.1mm |
2 | Bore Diameter | 57mm | 32mm |
3 | Length | 1695mm(3 7/8CAS BXP) | 1574mm(3 1/8-8UN BXP) |
Length | 1695mm(3 1/2"IF BXP) | 1604mm(2 7/8UP TBG BXP) | |
Length | 1695mm(3 1/2FH BXP) | 1638mm(2 7/8CAS BXP) | |
4 | Working pressure | 105Mpa | 105Mpa |
5 | Internal pressure strength | 149Mpa | 137.5Mpa |
6 | External pressure strength | 138Mpa | 128.1Mpa |
7 | Tensile strength | 1406KN | 1032.5KN |
8 | Torque strength | 22KN.m | 9.4kN.m |
9 | Service | H2S,NACE MR0175(>175oF) | H2S NACE MR0175(<175oF) |
10 | Working temperature | -29oC+204oC | -29oC+204oC |
11 | Connection thread | 3 7/8CAS. BXP 3 1/2 IF.BXP 3 1/2FH BXP | 3 1/8-8UN BXP 2 7/8UP TBG BXP 2 7/8CAS BXP |
ZZ TOP OIL TOOLS is the professional manufacturer for the drill stem testing tools and surface testing equipment. All the DST tools are conformed with NACE MR 0175 with traceability,and the DST tools can be worked in H2S & CO2 above 175 F and full H2S, also with the skilled and experienced engineers, we can design the drill stem testing tools as per customer's well condition. Moreover, we supply the training in our factory and operation instruction at the well site. The DST tools are exported to USA, Colombia, India, Pakistan, Iran, Brazil etc. and enjoy the good reputation from the customers.
To shorten the delivery time, we proceeded the DST Tools in stock:
Packer,circualting valve,select tester valve,APR N-valve,OMNI valve,Hydraulic Jar,Tubing string tester
1. Full bore Packer, 7" Casing, working pressure 70Mpa, Working Temperature 400F, Connection: IF, 4set
2. Tester valve, 5", Working pressure 105Mpa, Working temperature 400F, Connection CAS. BXP, 4 sets
3. Hydraulic Jar,5", Working pressure 105Mpa, Working temperature 400F, Connection CAS. BXP, 4sets
4. Rupture disk Circulating valve, 5", Working pressure 105Mpa, Working temperature 400F, Connection CAS. BXP, 4sets
5. Flowhead (surface test tree), 3 1/16", working pressure 70 Mpa. 1set
Should you have any interest or inquiry on the Drill stem testing tools, contact us freely.
Drill stem testing tools Hydraulic Jar Bigjohn fullbore
Bigjohn fullbore hyraulic jar 5" DST tools
