| Machine model | KSML220 | ||||
| Specification | A | B | C | D | |
| INJECTION UNIT | Unit | ||||
| Screw diameter | mm | 130 | 140 | 150 | 160 |
| Screw L/D ratio | L/D | 25.9 | 24 | 22.4 | 20.9 |
| Shot volume(therretical) | cm3 | 9460 | 11238 | 12900 | 14678 |
| Injection weight(ps) | g | 8609 | 10227 | 11739 | 13357 |
| Injection rate | g/s | 1172 | 1360 | 1560 | 1776 |
| Injection pressure | MPa | 190 | 163 | 142 | 125 |
| Screw speed | rpm | 70 | |||
| CLAMPING UNIT | |||||
| Clamping force | KN | 22000 | |||
| Open stroke | mm | 1600 | |||
| Space between tie bars(W×H) | mm | 1650×1500 | |||
| Max.Mould height | mm | 1620 | |||
| Min.Mould height | mm | 800 | |||
| Ejector stroke | mm | 420 | |||
| Ejector force | KN | 490 | |||
| Others | |||||
| Max.pump pressure | MPa | 16 | |||
| Pump motor power | KW | 45+55+55 | |||
| Heating power | KW | 111 | |||
| Numbers of heating area | segment | 8+1 | |||
| Machine dimension(L×W×H) | m | 17.8×3.4×4.3 | |||
| Oiltank cubage | L | 3700 | |||
| Machine weight | t | 156 | |||
| Standard Features | ||||
| Double-cylinder balance injection system | ||||
| Multi-stage pressure&speed injection | ||||
| Back pressure adjustment device | ||||
| Low pressure mold protevtion | ||||
| Multipe hydraulic ejector knock-out | ||||
| Mechanical electrical safety device | ||||
| Auto lubrication system | ||||
| Hydraulic pressure full proportional control | ||||
| Computer control system | ||||
| Molding data memory system | ||||
| Oil temperature controller | ||||
| Hopper magner | ||||
| Optional Features | ||||
| Double hydraulic pulling and inserting | ||||
| Air blowDV | ||||
| Hydraulic unscrew device | ||||
| Hydraulic safety device | ||||
| High speed clamping | ||||
| Linear guide | ||||
| Standard Accessory | ||||
| Anti-vibrating pad | ||||
| Spare parts kit | ||||
| Tool box | ||||
| Iubrication oil | ||||
| Optional Accessory | ||||
| Robotic pincher | ||||
| Hopper dryer | ||||
| Auto loader | ||||
| Mold clamps | ||||
| Water chiller | ||||
| Plastic dehumidizer | ||||
| Mold temperature controller | ||||
| Oilbypass filter | ||||
| Plastic granulator | ||||
| Plastic color-mixer | ||||
| Inverter |
