YR901 Impinj R2000 UHF RFID module
The YR901 uhf Rfid reader module, is a conform to the EPC C1G2 (ISO18000-6 c) standard of industrial-grade reader, with a wide working temperature range, reading performance excellence, super network stability etc., can be widely used in manufacturing and supply chain management, digital storage, commercial retail, asset management, and other fields.
Product features:
1,the built-in Impinj R2000 chip, fully tap potential R2000 chip;
2,use the advanced anti-jamming and prevent collision DRM algorithm, support tag processing more than 500 tags per second;
3,identify distance up to 35 metres, speeds of up to 120 km/hour
4, high sensitivity;
5,high reliability design, rugged industrial platform;
6, low-power design, significantly reduce energy consumption;
7,after repeated optimization, internal software, provide the fastest running efficiency and the most exploited connector;
8, enhanced multiple protection circuit, provide comprehensive protection.
Mechanical dimension:
Dimension(mm) : 77.5*51*7.8
Electrical parameters:
Standby current (mA) :60
operating voltage(v) :3.7- 5
operating current:1.2 A + / - 10%
operating temperature:- 20 ~ + 55
Storage temperature: 20 ~ + 85
operating humidity:< 95% (+ 25)
property parameters:
RFID chips:Impinj R2000
operating Frequency(MHZ) :
USA 902-928
European 865.6 867.6
China 920-925
The air connector protocol:EPC Global Class 1 Gen2 / ISO18000-6 c,ISO18000-6B
The opetating area supported:
Europe and other regions following ETSI EN 302 208 with & without LBT regulations
Largest employer China
Japan
Chesapeake
Malaysia
TAIWAN
Read distance(m) : > 30
RFID connector:four route TNC connector
Channel segregation degree(db) : > 30
Output power:20-33 DBM
Precision of the output power:+ / - 1 db
The output power flatness:+ / - 0.2 dB
Receiving sensitivity:< - 85 DBM
Communication interface:Ethernet: 10/100 base-t Ethernet (RJ45)
Serial:RS - 232 Console (DB9)
Serial:RS - 485 (Optional)
Label rate: > 500 / SEC
Label RSSI:supported
Antenna connection protection:support
Work style:single (intensive)
The I/O interface:2 route isolation light input, 2 route relay output
Maximum power consumption:< 7 w (RF output 30 DBM)
heat-dissipating method:air cooling
