3 Channel Voip To Gsm Gateway Cross-Network , Radio Repeater Gateway
Quick Detail:
- Model Number: RoIP302
- type: Radio Repeater
- Channels: 3
- Protocol: SIP
- Support: Radio,VoIP, GSM, Public Announce
Description:
RoIP-302
RoIP302 is developed based on the RoIP technology to bridge voice communications across multiple networks. It can connect up to 3 radio stations operated at different frequency bands simultaneously. These 3 radio stations can be configured in a single or multiple groups to communicate with another group which is defined in another RoIP device.This enables a very flexible configuration among various radio stations in order to form a single or multiple RoIP networks.With the built-in GSM and VoIP interfaces, RoIP-302 can also bridge voice communications among these networks.
What is RoIP (Radio over IP)?
The fundamental of RoIP ( Radio over IP) technology is to convert the audio and PTT signals in a radio terminal into IP
packets and then transmit the data via the IP networks. RoIP technology is developed to solve those problems and insure
that the audio is transmitted in real time and the PTT signals are transmitted immediately and reliably, making the long
distance voice communication across multiple networks possible.
What is a Cross-Network Gateway?
----It enables voice communications among the Radio, VoIP, GSM, and Public Announce (PA) networks.
----It incorporates Radio over Internet Protocol (RoIP) which converts radio voice communications into VoIP.
----It links up various radio networks together in order to extend the geographical coverage.
----It is a GSM voice gateway by enabling voice communications to and from the telephone networks (GSM and PSTN)
----It enables a voice connection to the public announce system for general and emergency broadcast.
----It makes recording of voice communications among various networks simple and easy.
Who Need the Cross-Network Gateway?
----Radio Service Operators who would like to expands their geographical coverage.
----Radio User who would like to make and receive calls from the telephone networks.
----System administrators who would like to monitor and maintain good control over the existing radio networks.
----System Integrator who would like to build or deploy a reliable voice communication network in timely manner.
Overview of RoIP-302
RoIP302 is developed based on the RoIP technology to bridge voice communications across multiple networks. It can
connect up to 3 radio stations operated at different frequency bands simultaneously. These 3 radio stations can be configured
in a single or multiple groups to communicate with another group which is defined in another RoIP device. This enables a very
flexible configuration among various radio stations in order to form a single or multiple RoIP networks. With the built in GSM and VoIP interfaces, RoIP-302 can also bridge voice communications among these networks.
Key features
· Support standard SIP to bridge Radio network viaIP network.
· DTMF code for remote Switch.
· Build in NAT
· IP recording.
· 3 PTT Ports.
· VAD technology, lower bandwidth
· PPPoE,fixed IP and DHCP access.
· DDNS supported.
· Built-in GSM module,Calling between GSM and Radio
Software Specifications
· Standard SIP VoIP Protocols ( IETF SIP V2)
· Codec: G.711 (A/µ law), G.729A/B, G.723.1
· Point-to-point protocol over Ethernet (PPPoE);
· Hypertext Transfer Protocol (HTTP);
· Dynamic Host Configuration Protocol (DHCP);
· Domain Name System (DNS);
· DTMF: In-band DTMF, SIP INFO
· Flexible jitter buffer
· VLAN / Qos
· Comfort noise generation (CNG)
· Voice activity detection (VAD)
· Dynamic DNS (DDNS)
· Support MXU up to 12 endpoints(Only for RoIP302M)
Hardware Specifications
1 Physical and Operating Conditions
- Dimension: 25 x 14 x 3 cm
- Main Unit Net Wegith: 380 g
- Storage Temperature: -40°C - 80°C
- Operating Temperature: 0°C - 40°C
2 Core Design
- CPU: ARM9
- RAM: 16MB
- FLASH: 4MB
- DSP: 196 MHz
3 PTT Interface
- PTTIN Active Low: <0.7V (4.7KΩ load)
- PTTIN Active High: >1.2V
- PTTOUT High Output: 5V (4.7 KΩ load)
- PTTOUT Low Output: 0V
- APUT Output: 8Ω 750mW 5V P-P
- AIN Input: 600Ω Internal Impedance, 0 – 0.6Vp-t-p
- ADJOUT (on the Adapter Cable): 2KΩ Potentiometer
4 GSM Module
- Operating Frequencies: EGSM900MHZ/DCS1800MHz and GSM850MHz/PCS1900MHz
- Transmit Power: Class 4 (2W) at EGSM900. Class (1W) at DCS1800 and PCS1900
5 Network Port
- Ethernet Port: 10/100 Base-T
- Standard Supported; IEEE802.1p
- IP Standard: IPV4
Installation
Applications:
Competitive Advantage:
1.Support standard SIP protocol
2.Support DDNS
3.Support ulaw alaw g.729 g723 etc code
4.Built in Linux OS
5.Peer to Peer provided
6.Built in GSM module
8. 3 PPT Ports
9. Send SMS
